ls1043a is really completely dma coherent in their entirety so add the dma-coherent property at the soc level in the device tree and drop the instances where it's specifically added to a few select devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx> Signed-off-by: Li Yang <leoyang.li@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 0da8d814297c..5749de512201 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -301,6 +301,7 @@ soc: soc { #size-cells = <2>; ranges; dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; @@ -890,7 +891,6 @@ pcie1: pcie@3400000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -918,7 +918,6 @@ pcie2: pcie@3500000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -946,7 +945,6 @@ pcie3: pcie@3600000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ -- 2.37.1