On Wed, Sep 14, 2022 at 11:47:10AM -0500, Rob Herring wrote: > On Wed, 14 Sep 2022 16:04:25 +0200, Christian Marangi wrote: > > Rework the qcom,adm Documentation to yaml schema. > > This is not a pure conversion since originally the driver has changed > > implementation for the #dma-cells and was wrong from the start. > > Also the driver now handles the common DMA clients implementation with > > the first cell that denotes the channel number and nothing else since > > the client will have to provide the crci information via other means. > > > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> > > --- > > .../devicetree/bindings/dma/qcom,adm.yaml | 96 +++++++++++++++++++ > > .../devicetree/bindings/dma/qcom_adm.txt | 61 ------------ > > 2 files changed, 96 insertions(+), 61 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml > > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt > > > > Running 'make dtbs_check' with the schema in this patch gives the > following warnings. Consider if they are expected or the schema is > incorrect. These may not be new warnings. > > Note that it is not yet a requirement to have 0 warnings for dtbs_check. > This will change in the future. > > Full log is available here: https://patchwork.ozlabs.org/patch/ > > > dma-controller@18300000: reset-names:1: 'c0' was expected > arch/arm/boot/dts/qcom-ipq8064-ap148.dtb > arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb > > dma-controller@18300000: reset-names:2: 'c1' was expected > arch/arm/boot/dts/qcom-ipq8064-ap148.dtb > arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb > > dma-controller@18300000: reset-names:3: 'c2' was expected > arch/arm/boot/dts/qcom-ipq8064-ap148.dtb > arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb > > dma-controller@18300000: reset-names: ['clk', 'pbus', 'c0', 'c1', 'c2'] is too long > arch/arm/boot/dts/qcom-ipq8064-ap148.dtb > arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb > > dma-controller@18300000: resets: [[12, 13], [12, 12], [12, 11], [12, 10], [12, 9]] is too long > arch/arm/boot/dts/qcom-ipq8064-ap148.dtb > arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb > Hi, I fixed these warning on the second commit of this series. -- Ansuel
