On Wed, 14 Sep 2022 16:04:25 +0200, Christian Marangi wrote: > Rework the qcom,adm Documentation to yaml schema. > This is not a pure conversion since originally the driver has changed > implementation for the #dma-cells and was wrong from the start. > Also the driver now handles the common DMA clients implementation with > the first cell that denotes the channel number and nothing else since > the client will have to provide the crci information via other means. > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> > --- > .../devicetree/bindings/dma/qcom,adm.yaml | 96 +++++++++++++++++++ > .../devicetree/bindings/dma/qcom_adm.txt | 61 ------------ > 2 files changed, 96 insertions(+), 61 deletions(-) > create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ dma-controller@18300000: reset-names:1: 'c0' was expected arch/arm/boot/dts/qcom-ipq8064-ap148.dtb arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb dma-controller@18300000: reset-names:2: 'c1' was expected arch/arm/boot/dts/qcom-ipq8064-ap148.dtb arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb dma-controller@18300000: reset-names:3: 'c2' was expected arch/arm/boot/dts/qcom-ipq8064-ap148.dtb arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb dma-controller@18300000: reset-names: ['clk', 'pbus', 'c0', 'c1', 'c2'] is too long arch/arm/boot/dts/qcom-ipq8064-ap148.dtb arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb dma-controller@18300000: resets: [[12, 13], [12, 12], [12, 11], [12, 10], [12, 9]] is too long arch/arm/boot/dts/qcom-ipq8064-ap148.dtb arch/arm/boot/dts/qcom-ipq8064-rb3011.dtb
