Il 17/08/22 10:07, bchihi@xxxxxxxxxxxx ha scritto:
From: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
Add thermal zones and thermal nodes for the mt8192.
Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index cbae5a5ee4a0..59ef4da06a70 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8192-power.h>
+#include <dt-bindings/reset/mt8192-resets.h>
/ {
compatible = "mediatek,mt8192";
@@ -599,6 +600,28 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8192-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts_calib_data1";
+ };
+
+ lvts_mcu: thermal-sensor@11278000 {
Please keep the nodes ordered by reg start.
Regards,
Angelo
+ compatible = "mediatek,mt8192-lvts-mcu";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_e_data1>;
+ nvmem-cell-names = "lvts_calib_data1";
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8192-spi",
"mediatek,mt6765-spi";
