Il 17/08/22 10:07, bchihi@xxxxxxxxxxxx ha scritto:
From: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
Add thermal zones and thermal nodes for the mt8195.
Signed-off-by: Tinghan Shen <tinghan.shen@xxxxxxxxxxxx>
Co-developed-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
Signed-off-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
Co-developed-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Co-developed-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 95967a0196d8..aafbbe83e6ba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/reset/mt8195-resets.h>
/ {
compatible = "mediatek,mt8195";
@@ -452,6 +453,28 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8195-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
+ lvts_mcu: thermal-sensor@11278000 {
Please keep the devicetree nodes ordered by address.
This one must be moved between mmc@1125000 and usb@11290000.
Regards,
Angelo
+ compatible = "mediatek,mt8195-lvts-mcu";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8195-spi",
"mediatek,mt6765-spi";
