Re: [PATCH v6 01/12] dt-bindings: display/msm: split qcom,mdss bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/09/2022 19:45, Dmitry Baryshkov wrote:
> On Sun, 11 Sept 2022 at 16:57, Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> On 11/09/2022 15:45, Dmitry Baryshkov wrote:
>>> On Sun, 11 Sept 2022 at 14:27, Krzysztof Kozlowski
>>> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>>>
>>>> On 10/09/2022 14:54, Dmitry Baryshkov wrote:
>>>>>>
>>>>>> However I think there is no such problem, as Dmitry said, that ref
>>>>>> changes anything. There will be always failure - either from parent
>>>>>> schema (using $ref) or from device child schema (the one which actually
>>>>>> misses the property).
>>>>>
>>>>> Initially I stumbled upon this issue with the dsi and dsi_phy nodes
>>>>> for msm8996 devices. If I have $ref here, dsi1/dsi1_phy nodes will
>>>>> emit warnings regarding the missing -supply properties despite nodes
>>>>> being disabled. If I use `compatible' here, the schema checks pass.
>>>>> Thus I'd prefer to leave `compatible' here. Not to mention that it
>>>>> also allows specifying a tighter binding than just using the $ref.
>>>>
>>>> I don't think we understood each other. I claim that error will be there
>>>> anyway, just from different schema. So your change fixes nothing in
>>>> total schema check...
>>>
>>> If the node is disabled, there will be no different schema check.
>>
>> As I wrote before, there was.
> 
> The following results were captured with the following command, with
> most of the DSI and MDSS schema files fixed, using the following
> command:
> $ PATH=~/.local/bin/:$PATH make -C ../build-64/ ARCH=arm64
> qcom/sda660-inforce-ifc6560.dtb  CHECK_DTBS=y
> DT_SCHEMA_FILES=display/msm
> 
> As you can see from the example below, when using 'compatible' I'm
> getting warnings just for the gpu@5000000 node, while using $ref I
> also got warnings for the dsi-phy@c996400 node (disabled in the DT
> file).
> For your reference the tree in question is uploaded to the:
>     https://git.linaro.org/people/dmitry.baryshkov/kernel.git msm-mdss-yaml

I did not say anything about msm-mdss. I said you will get errors from
child schema anyway.

	From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dtb:
dsi@c994000: clock-names: ['mdp_core', 'byte', 'byte_intf', 'mnoc',
'iface', 'bus', 'core_mmss', 'pixel', 'core'] is too long

	From schema:
/home/krzk/dev/linux/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

/home/krzk/dev/linux/linux/out/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dtb:
dsi@c994000: 'vdda-supply' does not match any of the regexes:
'pinctrl-[0-9]+'



If your child schema fails, the referencing schema fails as well...


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux