Re: [PATCH v6 01/12] dt-bindings: display/msm: split qcom,mdss bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/09/2022 12:23, Dmitry Baryshkov wrote:
> Split Mobile Display SubSystem (MDSS) root node bindings to the separate
> yaml file. Changes to the existing (txt) schema:
>  - Added optional "vbif_nrt_phys" region used by msm8996
>  - Made "bus" and "vsync" clocks optional (they are not used by some
>    platforms)
>  - Added (optional) "core" clock added recently to the mdss driver
>  - Added optional resets property referencing MDSS reset
>  - Defined child nodes pointing to corresponding reference schema.
>  - Dropped the "lut" clock. It was added to the schema by mistake (it is
>    a part of mdp4 schema, not the mdss).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/msm/mdp5.txt  |  30 +---
>  .../devicetree/bindings/display/msm/mdss.yaml | 166 ++++++++++++++++++
>  2 files changed, 167 insertions(+), 29 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/mdss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> index 43d11279c925..65d03c58dee6 100644
> --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
> +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
> @@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller
>  
>  Description:
>  
> -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
> -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
> +This is the bindings documentation for the MDP5 display
>  controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
>  
> -MDSS:
> -Required properties:
> -- compatible:
> -  * "qcom,mdss" - MDSS
> -- reg: Physical base address and length of the controller's registers.
> -- reg-names: The names of register regions. The following regions are required:
> -  * "mdss_phys"
> -  * "vbif_phys"
> -- interrupts: The interrupt signal from MDSS.
> -- interrupt-controller: identifies the node as an interrupt controller.
> -- #interrupt-cells: specifies the number of cells needed to encode an interrupt
> -  source, should be 1.
> -- power-domains: a power domain consumer specifier according to
> -  Documentation/devicetree/bindings/power/power_domain.txt
> -- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
> -- clock-names: the following clocks are required.
> -  * "iface"
> -  * "bus"
> -  * "vsync"
> -- #address-cells: number of address cells for the MDSS children. Should be 1.
> -- #size-cells: Should be 1.
> -- ranges: parent bus address space is the same as the child bus address space.
> -
> -Optional properties:
> -- clock-names: the following clocks are optional:
> -  * "lut"
> -
>  MDP5:
>  Required properties:
>  - compatible:
> diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
> new file mode 100644
> index 000000000000..8860fc55cca5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
> @@ -0,0 +1,166 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Mobile Display SubSystem (MDSS)
> +
> +maintainers:
> +  - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> +  - Rob Clark <robdclark@xxxxxxxxx>
> +
> +description:
> +  This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
> +  encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,mdss
> +
> +  reg:
> +    minItems: 2
> +    maxItems: 3
> +
> +  reg-names:
> +    minItems: 2
> +    items:
> +      - const: mdss_phys
> +      - const: vbif_phys
> +      - const: vbif_nrt_phys
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller:
> +    true

If there is going to be v7 - please make it one line.

> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  power-domains:
> +    maxItems: 1
> +    description: |
> +      The MDSS power domain provided by GCC
> +
> +  clocks:
> +    minItems: 1
> +    items:
> +      - description: Display abh clock
> +      - description: Display axi clock
> +      - description: Display vsync clock
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: iface
> +      - const: bus
> +      - const: vsync
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges:
> +    true

Ditto.

> +
> +  resets:
> +    items:
> +      - description: MDSS_CORE reset
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +  - power-domains
> +  - clocks
> +  - clock-names
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +patternProperties:
> +  "^mdp@[1-9a-f][0-9a-f]*$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,mdp5
> +
> +  "^dsi@[1-9a-f][0-9a-f]*$":
> +    type: object
> +    properties:
> +      compatible:
> +        const: qcom,mdss-dsi-ctrl

This should be ref to dsi-controller-main.yaml... or based on previous
Rob's feedback you dropped it everywhere in children?

> +
> +  "^dsi-phy@[1-9a-f][0-9a-f]*$":
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,dsi-phy-14nm
> +          - qcom,dsi-phy-14nm-660
> +          - qcom,dsi-phy-20nm
> +          - qcom,dsi-phy-28nm-hpm
> +          - qcom,dsi-phy-28nm-lp
> +
> +  "^hdmi-phy@[1-9a-f][0-9a-f]*$":
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,hdmi-phy-8084
> +          - qcom,hdmi-phy-8660
> +          - qcom,hdmi-phy-8960
> +          - qcom,hdmi-phy-8974
> +          - qcom,hdmi-phy-8996
> +
> +  "^hdmi-tx@[1-9a-f][0-9a-f]*$":
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,hdmi-tx-8084
> +          - qcom,hdmi-tx-8660
> +          - qcom,hdmi-tx-8960
> +          - qcom,hdmi-tx-8974
> +          - qcom,hdmi-tx-8994
> +          - qcom,hdmi-tx-8996
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    mdss@1a00000 {
> +      compatible = "qcom,mdss";
> +      reg = <0x1a00000 0x1000>,
> +            <0x1ac8000 0x3000>;
> +      reg-names = "mdss_phys", "vbif_phys";
> +
> +      power-domains = <&gcc MDSS_GDSC>;
> +
> +      clocks = <&gcc GCC_MDSS_AHB_CLK>,
> +               <&gcc GCC_MDSS_AXI_CLK>,
> +               <&gcc GCC_MDSS_VSYNC_CLK>;
> +      clock-names = "iface",
> +                    "bus",
> +                    "vsync";
> +
> +      interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +
> +      interrupt-controller;
> +      #interrupt-cells = <1>;
> +
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges;
> +

No need for blank line.



Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux