Allow specifing the exact calibration mode and calibration data as nvmem
cells, rather than specifying just a single calibration data blob.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
.../bindings/thermal/qcom-tsens.yaml | 64 ++++++++++++++++---
1 file changed, 54 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 038d81338fcf..b813f6f19c1d 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -77,18 +77,62 @@ properties:
- const: critical
nvmem-cells:
- minItems: 1
- maxItems: 2
- description:
- Reference to an nvmem node for the calibration data
+ oneOf:
+ - minItems: 1
+ maxItems: 2
+ description:
+ Reference to an nvmem node for the calibration data
+ - minItems: 5
+ maxItems: 35
+ description: |
+ Reference to an nvmem cells for the calibration mode, two calibration
+ bases and two cells per each sensor
nvmem-cell-names:
- minItems: 1
- items:
- - const: calib
- - enum:
- - calib_backup
- - calib_sel
+ oneOf:
+ - minItems: 1
+ items:
+ - const: calib
+ - enum:
+ - calib_backup
+ - calib_sel
+ - minItems: 5
+ items:
+ - const: mode
+ - const: base1
+ - const: base2
+ - const: s0_p1
+ - const: s0_p2
+ - const: s1_p1
+ - const: s1_p2
+ - const: s2_p1
+ - const: s2_p2
+ - const: s3_p1
+ - const: s3_p2
+ - const: s4_p1
+ - const: s4_p2
+ - const: s5_p1
+ - const: s5_p2
+ - const: s6_p1
+ - const: s6_p2
+ - const: s7_p1
+ - const: s7_p2
+ - const: s8_p1
+ - const: s8_p2
+ - const: s9_p1
+ - const: s9_p2
+ - const: s10_p1
+ - const: s10_p2
+ - const: s11_p1
+ - const: s11_p2
+ - const: s12_p1
+ - const: s12_p2
+ - const: s13_p1
+ - const: s13_p2
+ - const: s14_p1
+ - const: s14_p2
+ - const: s15_p1
+ - const: s15_p2
"#qcom,sensors":
description:
--
2.35.1
