Aside with a set of the trigger-like resets Baikal-T1 CCU provides additional directly controlled reset signals for the DDR and PCIe controllers. As a preparation before adding these resets support to the kernel let's extent the Baikal-T1 CCU IDs list with the new IDs, which will be used to access the corresponding reset controls. Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> --- Changelog v11: - This is a new patch created by detaching the DT-part from: [PATCH v10 6/7] clk: baikal-t1: Add DDR/PCIe directly controlled resets support (@Krzysztof) --- include/dt-bindings/reset/bt1-ccu.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/dt-bindings/reset/bt1-ccu.h b/include/dt-bindings/reset/bt1-ccu.h index 3578e83026bc..c691efaa678f 100644 --- a/include/dt-bindings/reset/bt1-ccu.h +++ b/include/dt-bindings/reset/bt1-ccu.h @@ -21,5 +21,14 @@ #define CCU_SYS_SATA_REF_RST 0 #define CCU_SYS_APB_RST 1 +#define CCU_SYS_DDR_FULL_RST 2 +#define CCU_SYS_DDR_INIT_RST 3 +#define CCU_SYS_PCIE_PCS_PHY_RST 4 +#define CCU_SYS_PCIE_PIPE0_RST 5 +#define CCU_SYS_PCIE_CORE_RST 6 +#define CCU_SYS_PCIE_PWR_RST 7 +#define CCU_SYS_PCIE_STICKY_RST 8 +#define CCU_SYS_PCIE_NSTICKY_RST 9 +#define CCU_SYS_PCIE_HOT_RST 10 #endif /* __DT_BINDINGS_RESET_BT1_CCU_H */ -- 2.37.2
