In preparation for adding initial device tree support for the StarFive
VisionFive board, which is similar with BeagleV Starlight, move most
of the content from jh7100-beaglev-starlight.dts to a new file, to be
shared between the two boards.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
.../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
2 files changed, 1 insertion(+), 155 deletions(-)
copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index c9af67f7a0d2..7cda3a89020a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -5,160 +5,9 @@
*/
/dts-v1/;
-#include "jh7100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/pinctrl-starfive.h>
+#include "jh7100-common.dtsi"
/ {
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
- aliases {
- serial0 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- timebase-frequency = <6250000>;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x2 0x0>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-ack {
- gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- label = "ack";
- };
- };
-};
-
-&gpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(62, GPO_LOW,
- GPO_I2C0_PAD_SCK_OEN,
- GPI_I2C0_PAD_SCK_IN)>,
- <GPIOMUX(61, GPO_LOW,
- GPO_I2C0_PAD_SDA_OEN,
- GPI_I2C0_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c1_pins: i2c1-0 {
- i2c-pins {
- pinmux = <GPIOMUX(47, GPO_LOW,
- GPO_I2C1_PAD_SCK_OEN,
- GPI_I2C1_PAD_SCK_IN)>,
- <GPIOMUX(48, GPO_LOW,
- GPO_I2C1_PAD_SDA_OEN,
- GPI_I2C1_PAD_SDA_IN)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(60, GPO_LOW,
- GPO_I2C2_PAD_SCK_OEN,
- GPI_I2C2_PAD_SCK_IN)>,
- <GPIOMUX(59, GPO_LOW,
- GPO_I2C2_PAD_SDA_OEN,
- GPI_I2C2_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- uart3_pins: uart3-0 {
- rx-pins {
- pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
- GPI_UART3_PAD_SIN)>;
- bias-pull-up;
- drive-strength = <14>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- tx-pins {
- pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
- GPO_ENABLE, GPI_NONE)>;
- bias-disable;
- drive-strength = <35>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-};
-
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- pmic@5e {
- compatible = "ti,tps65086";
- reg = <0x5e>;
- gpio-controller;
- #gpio-cells = <2>;
-
- regulators {
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <100>;
- i2c-scl-falling-time-ns = <100>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&osc_sys {
- clock-frequency = <25000000>;
-};
-
-&osc_aud {
- clock-frequency = <27000000>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- status = "okay";
};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
similarity index 96%
copy from arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
copy to arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index c9af67f7a0d2..6a66abacb612 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -11,9 +11,6 @@
#include <dt-bindings/pinctrl/pinctrl-starfive.h>
/ {
- model = "BeagleV Starlight Beta";
- compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
aliases {
serial0 = &uart3;
};
--
2.37.3
