The StarFive VisionFive V1 SBC [1] is similar with the already supported BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. In addition to documenting the necessary compatibles, this patch series moves most of the content from jh7100-beaglev-starlight.dts to a new file jh7100-common.dtsi, to be shared between the two boards. No other changes are required in order to successfully boot the board. [1] https://github.com/starfive-tech/VisionFive Changes in v3: - Added Reviewed-by tag from Krzysztof in patch 1/3 - Optimized patch 2/3 by enabling copy detection on "git format-patch", as indicated by Krzysztof Changes in v2: - Simplified documentation by using 'enum' instead of 'const' in patch 1/3, according to Conor's review - Added Reviewed-by tags from Conor Cristian Ciocaltea (3): dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board riscv: dts: starfive: Add common DT for JH7100 based boards riscv: dts: starfive: Add StarFive VisionFive V1 device tree .../devicetree/bindings/riscv/starfive.yaml | 4 +- arch/riscv/boot/dts/starfive/Makefile | 2 +- .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - .../jh7100-starfive-visionfive-v1.dts | 20 +++ 5 files changed, 25 insertions(+), 157 deletions(-) copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts -- 2.37.3
