This patch series addresses the following:
- Moving of flexcom definitions from board file to SoC file plus
some minor changes to its properties.
- Add support for the new sam9x60 curiosity board based on the
existing sam9x60 SoC.
Durai Manickam KR (1):
ARM: dts: at91: sam9x60: Add missing flexcom definitions
Hari Prasath (2):
ARM: dts: at91: sam9x60: Move flexcom definitions to the SoC dtsi
ARM: dts: at91: sam9x60: Add DMA bindigs for the flexcom nodes
Manikandan M (3):
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom
functions
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60_curiosity: Add device tree for
sam9x60_curiosity board
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 532 +++++++++++++++
arch/arm/boot/dts/at91-sam9x60ek.dts | 49 +-
arch/arm/boot/dts/sam9x60.dtsi | 623 ++++++++++++++++++
5 files changed, 1172 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
--
2.17.1
