Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> writes:
> The AC5/AC5X SoC has 4 UART blocks. Add the additional UART1-3 blocks to
> the base dtsi file.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
>
> Notes:
> This applies on top of the series adding the AC5/AC5X SoC which is in
> Gregory's mvebu/dt64 tree but hasn't made it to Linus's (yet).
>
> arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> index 80b44c7df56a..914fcf9e2c24 100644
> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> @@ -95,6 +95,36 @@ uart0: serial@12000 {
> status = "okay";
> };
>
> + uart1: serial@12100 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x11000 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&cnm_clock>;
> + status = "disabled";
> + };
> +
> + uart2: serial@12200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12200 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&cnm_clock>;
> + status = "disabled";
> + };
> +
> + uart3: serial@12300 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x12300 0x100>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + reg-io-width = <1>;
> + clocks = <&cnm_clock>;
> + status = "disabled";
> + };
> +
> mdio: mdio@22004 {
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.37.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
