From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Currently, we limited the voltages from the PMIC very strictly. This
causes an issue with one Toradex SKU that uses a consumer-grade chip
that is capable of going up to 1.8GHz at 1.00V.
Extend the ranges to min/max values of the SoC operating ranges (table
10) in the datasheet. Detailed explanation as follows:
BUCK2:
- As already described above, the SKU with the consumer-grade chip
needs a voltage of at least 1.00V. 1.05V is chosen now as this is
listed as the maximum. Both industrial and consumer-grade chips have
an absolute maximum rating of 1.15V which makes it still safe to put
1.05V
- Lower the regulator-min value to the smallest value allowed from the
Quad-A53, 1.2GHz version of the SoC
BUCK3:
- This regulator is used for SoC input voltages VDD_GPU, VDD_VPU and
VDD_DRAM.
- Use the smallest value of these three inputs as the regulator-min
- Use the largest value of these three inputs as the regulator-max
LDO2:
- This LDO is used for VDD_SNVS_0P8 SoC input voltage. As this has a
single nominal input voltage just put this in the middle of 0.8V.
Fixes: commit 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index ef105c0745eb..2eb72a607139 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -382,8 +382,8 @@ reg_vdd_arm: BUCK2 {
nxp,dvs-standby-voltage = <850000>;
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <950000>;
- regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_ARM (BUCK2)";
regulator-ramp-delay = <3125>;
};
@@ -391,8 +391,8 @@ reg_vdd_arm: BUCK2 {
reg_vdd_dram: BUCK3 {
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <950000>;
- regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
};
@@ -431,7 +431,7 @@ reg_nvcc_snvs: LDO1 {
reg_vdd_snvs: LDO2 {
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <800000>;
regulator-min-microvolt = <800000>;
regulator-name = "On-module +V0.8_SNVS (LDO2)";
};
--
2.36.1
