On 31.08.2022 22:44, Horatiu Vultur wrote:
> Add led configuration for pcb8291 and pcb8309. Both pcbs have 4 leds which
> are connected to the sgpio controller.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/lan966x-pcb8291.dts | 29 +++++++++++++++++++++++++++
> arch/arm/boot/dts/lan966x-pcb8309.dts | 29 +++++++++++++++++++++++++++
> 2 files changed, 58 insertions(+)
>
> diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
> index 24d9055c4a08..649cfe69d98d 100644
> --- a/arch/arm/boot/dts/lan966x-pcb8291.dts
> +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
> @@ -23,6 +23,35 @@ gpio-restart {
> gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
> priority = <200>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
There is no need for status here. Default is okay.
> +
> + led-s0-blue {
> + label = "s0:blue";
> + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s0-green {
> + label = "s0:green";
> + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s1-blue {
> + label = "s1:blue";
> + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s1-green {
> + label = "s1:green";
> + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> + };
> };
>
> &gpio {
> diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
> index 05ce27ed5648..4f30975b4a13 100644
> --- a/arch/arm/boot/dts/lan966x-pcb8309.dts
> +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
> @@ -42,6 +42,35 @@ i2c103: i2c-sfp@2 {
> };
> };
>
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
Ditto
> +
> + led-s0-green {
> + label = "s0:green";
> + gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s0-red {
> + label = "s0:red";
> + gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s1-green {
> + label = "s1:green";
> + gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-s1-red {
> + label = "s1:red";
> + gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> + };
> +
> mux: mux-controller {
> compatible = "gpio-mux";
> #mux-control-cells = <0>;
