PinePhone Pro is a RK3399 based phone produced by Pine64. Add a basic DTS for it. This is a working base that will allow myself and others to add more nodes. Relies on "dt-bindings: arm: rockchip: Add PinePhone Pro bindings"[0]. dtbs_check found some violations, but they were all common to the rk3399.dtsi (and thus occurred on other RK3399 SoC DTs). 0. https://lore.kernel.org/all/20220815123004.252014-2-tom@xxxxxxxxxxxxxxxxxxx/ Changes since v4: * Add regulator vcc1v8_codec. * Un-enable unused regulators for codec and touch. * Fix voltage ranges on vdd_center and vccio_sd. * Un-modify unused gpu_opp_table. Changes since v3: * Fix regulator min/max voltages, to align with RK3399-T datasheet. * Re-enable cluster1_opp/opp06, with freq/volts as per RK3399-T datasheet. * Fix gpu_opp_table voltages to align with RK3399-T datasheet. * Change regulator names, to align with PinePhone Pro datasheet. * Use DT Generic Names Recommendation: power -> key-power. * Remove unused label vcc_wl on regulator. * Fix code style. Changes since v2: * Used rk3399-opp.dtsi (+ disabled) rather than introdu4cing rk3399-t-opp.dtsi * Removed superfluous comments. * Followed DT Generic Names Recommendation * Set 'From:' of DTS patch to be Martijn, the primary contributor to the DT. Changes since v1: * Simplified the DT to a minimal base. * Introduced the RK3399-T OPPs. Martijn Braam (1): arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3399-pinephone-pro.dts | 398 ++++++++++++++++++ 2 files changed, 399 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts base-commit: 2e1170c71ec0c0fb785ce76fca7c682e930af2b8 prerequisite-patch-id: 41a5419f57b2712f7127d5c6cf1dbf062f6570da -- 2.37.1
