Hi, this series introduces a driver for Amlogic Meson pinctrl and GPIOs, adding the basic infrastructure for all the SoCs of the Meson family and configuration data specific for the Meson8. The last patch depends on a previous series that adds meson8 device tree files and can be found here: http://lwn.net/Articles/615033/ I tested the pinmux and GPIO functionalities on a Tronsmart Vega S89e TV box and everything seems to work, however I'm not so familiar with the pinctrl subsystem and thus any feedback is very welcome. Beniamino Galvani (3): pinctrl: add driver for Amlogic Meson SoCs pinctrl: meson: add device tree bindings documentation ARM: dts: meson8: add pinctrl and gpio nodes .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 80 ++ arch/arm/boot/dts/meson8-vega-s89e.dts | 16 +- arch/arm/boot/dts/meson8.dtsi | 35 + arch/arm/mach-meson/Kconfig | 3 + drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/meson/Makefile | 2 + drivers/pinctrl/meson/pinctrl-meson.c | 823 +++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson.h | 217 ++++++ drivers/pinctrl/meson/pinctrl-meson8.c | 374 ++++++++++ include/dt-bindings/gpio/meson8-gpio.h | 155 ++++ 11 files changed, 1713 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt create mode 100644 drivers/pinctrl/meson/Makefile create mode 100644 drivers/pinctrl/meson/pinctrl-meson.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson.h create mode 100644 drivers/pinctrl/meson/pinctrl-meson8.c create mode 100644 include/dt-bindings/gpio/meson8-gpio.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
