On Wed, Aug 17, 2022 at 05:43:18AM +0000, Eliav Farber wrote: > Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and > "ts-coeff-j" properties to be used instead of defaults for the > thermal equasion. > Vendor prefix again, and shouldn;t there be some note about the to-be-used defaults ? Guenter > Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx> > --- > .../bindings/hwmon/moortec,mr75203.yaml | 33 +++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > index e2a55001eefc..867664bd937f 100644 > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > @@ -62,6 +62,30 @@ properties: > used to normalzie the voltage output results. > $ref: /schemas/types.yaml#definitions/uint32 > > + ts-coeff-g: > + description: > + G coefficient for thermal equation. > + maxItems: 1 > + $ref: /schemas/types.yaml#definitions/uint32 > + > + ts-coeff-h: > + description: > + H coefficient for thermal equation. > + maxItems: 1 > + $ref: /schemas/types.yaml#definitions/uint32 > + > + ts-coeff-cal5: > + description: > + cal5 coefficient for thermal equation (can't be 0). > + maxItems: 1 > + $ref: /schemas/types.yaml#definitions/uint32 > + > + ts-coeff-j: > + description: > + J coefficient for thermal equation. > + maxItems: 1 > + $ref: /schemas/types.yaml#definitions/int32 > + > required: > - compatible > - reg > @@ -75,6 +99,10 @@ additionalProperties: > - reset-control-skip > - vm-active-channels > - vm-pre-scalar-ch# > + - ts-coeff-g > + - ts-coeff-h > + - ts-coeff-cal5 > + - ts-coeff-j > > examples: > - | > @@ -90,5 +118,10 @@ examples: > resets = <&rcu0 0x40 7>; > vm-active-channels = [08 10 02]; > vm-pre-scalar-ch5 = <2>; > + ts-coeff-g = <57400>; > + ts-coeff-h = <249400>; > + ts-coeff-cal5 = <4096>; > + ts-coeff-j = <0>; > + > #thermal-sensor-cells = <1>; > };
