From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Add efuse node.
This will be required by the thermal driver to get the calibration data.
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Co-developed-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 066c14989708..95967a0196d8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -733,6 +733,18 @@ u2_intr_p3: usb2-intr-p3@189,2 {
reg = <0x189 0x2>;
bits = <7 5>;
};
+
+ lvts_efuse_data1: lvts1-calib@1bc {
+ reg = <0x1bc 0x14>;
+ };
+
+ lvts_efuse_data2: lvts2-calib@1d0 {
+ reg = <0x1d0 0x38>;
+ };
+
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy2: t-phy@11c40000 {
--
2.34.1
