From: Michael Kao <michael.kao@xxxxxxxxxxxx>
Add MediaTek proprietary folder to upstream more thermal zone and cooler
drivers, relocate the original thermal controller driver to it, and rename it
as "auxadc_thermal.c" to show its purpose more clearly.
Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
Co-developed-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
Signed-off-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
Co-developed-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx>
---
drivers/thermal/Kconfig | 14 ++++--------
drivers/thermal/Makefile | 2 +-
drivers/thermal/mediatek/Kconfig | 22 +++++++++++++++++++
drivers/thermal/mediatek/Makefile | 1 +
.../auxadc_thermal.c} | 2 +-
5 files changed, 29 insertions(+), 12 deletions(-)
create mode 100644 drivers/thermal/mediatek/Kconfig
create mode 100644 drivers/thermal/mediatek/Makefile
rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e052dae614eb..d35f63daca3b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -412,16 +412,10 @@ config DA9062_THERMAL
zone.
Compatible with the DA9062 and DA9061 PMICs.
-config MTK_THERMAL
- tristate "Temperature sensor driver for mediatek SoCs"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- depends on NVMEM || NVMEM=n
- depends on RESET_CONTROLLER
- default y
- help
- Enable this option if you want to have support for thermal management
- controller present in Mediatek SoCs
+menu "Mediatek thermal drivers"
+depends on ARCH_MEDIATEK || COMPILE_TEST
+source "drivers/thermal/mediatek/Kconfig"
+endmenu
config AMLOGIC_THERMAL
tristate "Amlogic Thermal Support"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index def8e1a0399c..f7daeb8056c4 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -55,7 +55,7 @@ obj-y += st/
obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
-obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
+obj-y += mediatek/
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
new file mode 100644
index 000000000000..8ff32370b591
--- /dev/null
+++ b/drivers/thermal/mediatek/Kconfig
@@ -0,0 +1,22 @@
+config MTK_THERMAL
+ tristate "MediaTek thermal drivers"
+ depends on THERMAL_OF
+ help
+ This is the option for MediaTek thermal software solutions.
+ Please enable corresponding options to get temperature
+ information from thermal sensors or turn on throttle
+ mechaisms for thermal mitigation.
+
+if MTK_THERMAL
+
+config MTK_SOC_THERMAL
+ tristate "AUXADC temperature sensor driver for MediaTek SoCs"
+ depends on HAS_IOMEM
+ depends on NVMEM
+ depends on RESET_CONTROLLER
+ help
+ Enable this option if you want to get SoC temperature
+ information for MediaTek platforms. This driver configures
+ thermal controllers to collect temperature via AUXADC interface.
+
+endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
new file mode 100644
index 000000000000..bec325f06a46
--- /dev/null
+++ b/drivers/thermal/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
similarity index 99%
rename from drivers/thermal/mtk_thermal.c
rename to drivers/thermal/mediatek/auxadc_thermal.c
index ede94eadddda..60924f8f98e9 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -23,7 +23,7 @@
#include <linux/reset.h>
#include <linux/types.h>
-#include "thermal_hwmon.h"
+#include "../thermal_hwmon.h"
/* AUXADC Registers */
#define AUXADC_CON1_SET_V 0x008
--
2.34.1
