The dwc pwm controller can be used in non-PCI systems, so allow
either platform or OF based probing.
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxx>
---
v4:
- split the of code out of the core
- moved the compile test code earlier
- fixed review comments
- used NS_PER_SEC
- use devm_clk_get_enabled
v3:
- changed compatible name
---
drivers/pwm/Kconfig | 9 +++++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-dwc-of.c | 78 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 88 insertions(+)
create mode 100644 drivers/pwm/pwm-dwc-of.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index a9f1c554db2b..f1735653365f 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -192,6 +192,15 @@ config PWM_DWC_PCI
To compile this driver as a module, choose M here: the module
will be called pwm-dwc-pci.
+config PWM_DWC_OF
+ tristate "DesignWare PWM Controller (OF bus)
+ depends on PWM_DWC && OF
+ help
+ PWM driver for Synopsys DWC PWM Controller on an OF bus.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-dwc-of.
+
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
depends on ARCH_EP93XX || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index a70d36623129..d1fd1641f077 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
obj-$(CONFIG_PWM_DWC) += pwm-dwc.o
+obj-$(CONFIG_PWM_DWC_OF) += pwm-dwc-of.o
obj-$(CONFIG_PWM_DWC_PCI) += pwm-dwc-pci.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
diff --git a/drivers/pwm/pwm-dwc-of.c b/drivers/pwm/pwm-dwc-of.c
new file mode 100644
index 000000000000..d18fac287325
--- /dev/null
+++ b/drivers/pwm/pwm-dwc-of.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DesignWare PWM Controller driver OF
+ *
+ * Copyright (C) 2022 SiFive, Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+
+#include "pwm-dwc.h"
+
+static int dwc_pwm_plat_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dwc_pwm *dwc;
+ int ret;
+
+ dwc = dwc_pwm_alloc(dev);
+ if (!dwc)
+ return -ENOMEM;
+
+ dwc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(dwc->base))
+ return dev_err_probe(dev, PTR_ERR(dwc->base),
+ "failed to map IO\n");
+
+ dwc->clk = devm_clk_get_enabled(dev, "timer");
+ if (IS_ERR(dwc->clk))
+ return dev_err_probe(dev, PTR_ERR(dwc->clk),
+ "failed to get timer clock\n");
+
+ clk_prepare_enable(dwc->clk);
+ dwc->clk_ns = NSEC_PER_SEC / clk_get_rate(dwc->clk);
+
+ ret = devm_pwmchip_add(dev, &dwc->chip);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int dwc_pwm_plat_remove(struct platform_device *pdev)
+{
+ struct dwc_pwm *dwc = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(dwc->clk);
+ return 0;
+}
+
+static const struct of_device_id dwc_pwm_dt_ids[] = {
+ { .compatible = "snps,dw-apb-timers-pwm2" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, dwc_pwm_dt_ids);
+
+static struct platform_driver dwc_pwm_plat_driver = {
+ .driver = {
+ .name = "dwc-pwm",
+ .of_match_table = dwc_pwm_dt_ids,
+ },
+ .probe = dwc_pwm_plat_probe,
+ .remove = dwc_pwm_plat_remove,
+};
+
+module_platform_driver(dwc_pwm_plat_driver);
+
+MODULE_ALIAS("platform:dwc-pwm-of");
+MODULE_AUTHOR("Ben Dooks <ben.dooks@xxxxxxxxxx>");
+MODULE_DESCRIPTION("DesignWare PWM Controller");
+MODULE_LICENSE("GPL");
--
2.35.1
