On 2022/8/15 14:34, Yu Tu wrote:
The HDMI PLL is configured in the Uboot phase and does not change the frequency in the kernel phase. So we use the NOCACHE flag and "ro_ops".Hi Jerome, On 2022/8/10 21:47, Jerome Brunet wrote:[ EXTERNAL EMAIL ] On Fri 05 Aug 2022 at 16:57, Yu Tu <yu.tu@xxxxxxxxxxx> wrote:Add the S4 PLL clock controller found in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@xxxxxxxxxxx> --- drivers/clk/meson/Kconfig | 12 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-pll.c | 891 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/s4-pll.h | 88 ++++ 4 files changed, 992 insertions(+) create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..f4244edc7b28 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -115,4 +115,16 @@ config COMMON_CLK_G12A helpSupport for the clock controller on Amlogic S905D2, S905X2 and S905Y2devices, aka g12a. Say Y if you want peripherals to work. + +config COMMON_CLK_S4_PLL + tristate "S4 SoC PLL clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_MPLL + select COMMON_CLK_MESON_PLL + select COMMON_CLK_MESON_REGMAP + help+ Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices, + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.+ Say Y if you want peripherals and CPU frequency scaling to work.Looks like this doc is copy/paste of the peripheral controller. This probably needs to be updatedOkay.endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..376f49cc13f1 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c new file mode 100644 index 000000000000..478c78b5ed46 --- /dev/null +++ b/drivers/clk/meson/s4-pll.c @@ -0,0 +1,891 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@xxxxxxxxxxx> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-mpll.h" +#include "clk-pll.h" +#include "clk-regmap.h" +#include "s4-pll.h" + +static DEFINE_SPINLOCK(meson_clk_lock); + +static struct clk_regmap s4_fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fixed_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * This clock won't ever change at runtime so + * CLK_SET_RATE_PARENT is not required + */ + }, +}; + +static struct clk_fixed_factor s4_fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div3_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div4_div = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div4 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div4_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div2p5_div = { + .mult = 2, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2p5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2p5_div.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range s4_gp0_pll_mult_range = { + .min = 125, + .max = 250, +}; + +/* + * Internal gp0 pll emulation configuration parameters + */ +static const struct reg_sequence s4_gp0_init_regs[] = { + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 }, + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 }, + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_gp0_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_GP0PLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_gp0_init_regs, + .init_count = ARRAY_SIZE(s4_gp0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_gp0_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_GP0PLL_CTRL0, + .shift = 16, + .width = 3, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gp0_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * Internal hifi pll emulation configuration parameters + */ +static const struct reg_sequence s4_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_hifi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_hifi_init_regs, + .init_count = ARRAY_SIZE(s4_hifi_init_regs), + .flags = CLK_MESON_PLL_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hifi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HIFIPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hifi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HDMIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + /* + * Display directly handle hdmi pll registers ATM, we need + * NOCACHE to keep our view of the clock as accurate as + * possible + */Is it really ? Given that HDMI support for the s4 is there yet, the addresses have changes and the region is no longer a syscon, it is time for the HDMI driver to get fixed.
Sorry, maybe I didn't pay attention to this comment earlier. A little bit of a question why is this not okay? I understand isn't it better for the compiler to help with this calculation itself?+ .flags = CLK_GET_RATE_NOCACHE, + }, +}; + +static struct clk_regmap s4_hdmi_pll_od = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 16, + .width = 4, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_od", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_dco.hw + }, + .num_parents = 1, + /* + * Display directly handle hdmi pll registers ATM, we need + * NOCACHE to keep our view of the clock as accurate as + * possible + */ + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 20, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_od.hw + }, + .num_parents = 1, + /* + * Display directly handle hdmi pll registers ATM, we need + * NOCACHE to keep our view of the clock as accurate as + * possible + */ + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_mpll_50m_div = { + .mult = 1, + .div = 80, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll_50m = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_FIXPLL_CTRL3, + .mask = 0x1, + .shift = 5, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_mpll_50m_div.hw }, + }, + .num_parents = 2, + }, +}; + +static struct clk_fixed_factor s4_mpll_prediv = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "mpll_prediv", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct reg_sequence s4_mpll0_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll0_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll0_init_regs, + .init_count = ARRAY_SIZE(s4_mpll0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL1, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll1_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll1_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll1_init_regs, + .init_count = ARRAY_SIZE(s4_mpll1_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL3, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll2_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll2_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll2_init_regs, + .init_count = ARRAY_SIZE(s4_mpll2_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL5, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll3_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll3_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll3_init_regs, + .init_count = ARRAY_SIZE(s4_mpll3_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL7, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw, + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw, + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw, + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw, + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw, + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw, + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw, + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw, + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw, + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw, + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw, + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw, + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw, + [CLKID_GP0_PLL] = &s4_gp0_pll.hw, + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw, + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw, + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw, + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw, + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw, + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw, + [CLKID_MPLL_50M] = &s4_mpll_50m.hw, + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw, + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw, + [CLKID_MPLL0] = &s4_mpll0.hw, + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw, + [CLKID_MPLL1] = &s4_mpll1.hw, + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw, + [CLKID_MPLL2] = &s4_mpll2.hw, + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw, + [CLKID_MPLL3] = &s4_mpll3.hw, + + [NR_PLL_CLKS] = NULL + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const s4_pll_clk_regmaps[] = { + &s4_fixed_pll_dco, + &s4_fixed_pll, + &s4_fclk_div2, + &s4_fclk_div3, + &s4_fclk_div4, + &s4_fclk_div5, + &s4_fclk_div7, + &s4_fclk_div2p5, + &s4_gp0_pll_dco, + &s4_gp0_pll, + &s4_hifi_pll_dco, + &s4_hifi_pll, + &s4_hdmi_pll_dco, + &s4_hdmi_pll_od, + &s4_hdmi_pll, + &s4_mpll_50m, + &s4_mpll0_div, + &s4_mpll0, + &s4_mpll1_div, + &s4_mpll1, + &s4_mpll2_div, + &s4_mpll2, + &s4_mpll3_div, + &s4_mpll3, +}; + +static const struct reg_sequence s4_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 }, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); ++ ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));+ if (ret) { + dev_err(dev, "Failed to init registers\n"); + return ret; + } + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++) + s4_pll_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_pll_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_pll_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-pll-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_pll_probe, + .driver = { + .name = "s4-pll-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h new file mode 100644 index 000000000000..41dc6de978c1 --- /dev/null +++ b/drivers/clk/meson/s4-pll.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@xxxxxxxxxxx> + */ + +#ifndef __MESON_S4_PLL_H__ +#define __MESON_S4_PLL_H__ + +/* ANA_CTRL - Registers + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000 + */ +#define ANACTRL_FIXPLL_CTRL0 (0x0010 << 2)I already commented on the "<< 2" . Remove them please.+#define ANACTRL_FIXPLL_CTRL1 (0x0011 << 2) +#define ANACTRL_FIXPLL_CTRL2 (0x0012 << 2) +#define ANACTRL_FIXPLL_CTRL3 (0x0013 << 2) +#define ANACTRL_FIXPLL_CTRL4 (0x0014 << 2) +#define ANACTRL_FIXPLL_CTRL5 (0x0015 << 2) +#define ANACTRL_FIXPLL_CTRL6 (0x0016 << 2) +#define ANACTRL_FIXPLL_STS (0x0017 << 2) +#define ANACTRL_GP0PLL_CTRL0 (0x0020 << 2) +#define ANACTRL_GP0PLL_CTRL1 (0x0021 << 2) +#define ANACTRL_GP0PLL_CTRL2 (0x0022 << 2) +#define ANACTRL_GP0PLL_CTRL3 (0x0023 << 2) +#define ANACTRL_GP0PLL_CTRL4 (0x0024 << 2) +#define ANACTRL_GP0PLL_CTRL5 (0x0025 << 2) +#define ANACTRL_GP0PLL_CTRL6 (0x0026 << 2) +#define ANACTRL_GP0PLL_STS (0x0027 << 2) +#define ANACTRL_HIFIPLL_CTRL0 (0x0040 << 2) +#define ANACTRL_HIFIPLL_CTRL1 (0x0041 << 2) +#define ANACTRL_HIFIPLL_CTRL2 (0x0042 << 2) +#define ANACTRL_HIFIPLL_CTRL3 (0x0043 << 2) +#define ANACTRL_HIFIPLL_CTRL4 (0x0044 << 2) +#define ANACTRL_HIFIPLL_CTRL5 (0x0045 << 2) +#define ANACTRL_HIFIPLL_CTRL6 (0x0046 << 2) +#define ANACTRL_HIFIPLL_STS (0x0047 << 2) +#define ANACTRL_MPLL_CTRL0 (0x0060 << 2) +#define ANACTRL_MPLL_CTRL1 (0x0061 << 2) +#define ANACTRL_MPLL_CTRL2 (0x0062 << 2) +#define ANACTRL_MPLL_CTRL3 (0x0063 << 2) +#define ANACTRL_MPLL_CTRL4 (0x0064 << 2) +#define ANACTRL_MPLL_CTRL5 (0x0065 << 2) +#define ANACTRL_MPLL_CTRL6 (0x0066 << 2) +#define ANACTRL_MPLL_CTRL7 (0x0067 << 2) +#define ANACTRL_MPLL_CTRL8 (0x0068 << 2) +#define ANACTRL_MPLL_STS (0x0069 << 2) +#define ANACTRL_HDMIPLL_CTRL0 (0x0070 << 2) +#define ANACTRL_HDMIPLL_CTRL1 (0x0071 << 2) +#define ANACTRL_HDMIPLL_CTRL2 (0x0072 << 2) +#define ANACTRL_HDMIPLL_CTRL3 (0x0073 << 2) +#define ANACTRL_HDMIPLL_CTRL4 (0x0074 << 2) +#define ANACTRL_HDMIPLL_CTRL5 (0x0075 << 2) +#define ANACTRL_HDMIPLL_CTRL6 (0x0076 << 2) +#define ANACTRL_HDMIPLL_STS (0x0077 << 2) +#define ANACTRL_HDMIPLL_VLOCK (0x0079 << 2) + +/* + * CLKID index values + *+ * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks,+ * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 4 +#define CLKID_FCLK_DIV4_DIV 6 +#define CLKID_FCLK_DIV5_DIV 8 +#define CLKID_FCLK_DIV7_DIV 10 +#define CLKID_FCLK_DIV2P5_DIV 12 +#define CLKID_GP0_PLL_DCO 14 +#define CLKID_HIFI_PLL_DCO 16 +#define CLKID_HDMI_PLL_DCO 18 +#define CLKID_HDMI_PLL_OD 19 +#define CLKID_MPLL_50M_DIV 21 +#define CLKID_MPLL_PREDIV 23 +#define CLKID_MPLL0_DIV 24 +#define CLKID_MPLL1_DIV 26 +#define CLKID_MPLL2_DIV 28 +#define CLKID_MPLL3_DIV 30 + +#define NR_PLL_CLKS 32 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> + +#endif /* __MESON_S4_PLL_H__ */.
