On Mon, 06 Oct 2014, Boris Brezillon wrote:
> The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
> family or sama5d3 family) exposes 2 subdevices:
> - a display controller (controlled by a DRM driver)
> - a PWM chip
>
> This patch adds documentation for atmel-hlcdc DT bindings.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> Tested-by: Anthony Harivel <anthony.harivel@xxxxxxxxxx>
> Tested-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/atmel-hlcdc.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
Applied for v3.19.
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> new file mode 100644
> index 0000000..f64de95a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> @@ -0,0 +1,51 @@
> +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
> +
> +Required properties:
> + - compatible: value should be one of the following:
> + "atmel,sama5d3-hlcdc"
> + - reg: base address and size of the HLCDC device registers.
> + - clock-names: the name of the 3 clocks requested by the HLCDC device.
> + Should contain "periph_clk", "sys_clk" and "slow_clk".
> + - clocks: should contain the 3 clocks requested by the HLCDC device.
> + - interrupts: should contain the description of the HLCDC interrupt line
> +
> +The HLCDC IP exposes two subdevices:
> + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
> + - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
> +
> +Example:
> +
> + hlcdc: hlcdc@f0030000 {
> + compatible = "atmel,sama5d3-hlcdc";
> + reg = <0xf0030000 0x2000>;
> + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> + clock-names = "periph_clk","sys_clk", "slow_clk";
> + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> + status = "disabled";
> +
> + hlcdc-display-controller {
> + compatible = "atmel,hlcdc-display-controller";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + hlcdc_panel_output: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + };
> + };
> + };
> +
> + hlcdc_pwm: hlcdc-pwm {
> + compatible = "atmel,hlcdc-pwm";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_pwm>;
> + #pwm-cells = <3>;
> + };
> + };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
