Use "PP1800_L2C" as the DMIC power source. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx> Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx> --- This patch depends on: arm64: dts: qcom: sc7280: Add herobrine-villager-r1. [1] [1] https://patchwork.kernel.org/patch/12926099/ .../dts/qcom/sc7280-herobrine-villager-r1.dts | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts index c03b3ae4de50..983defa7c76d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts @@ -12,3 +12,31 @@ / { model = "Google Villager (rev1+)"; compatible = "google,villager", "qcom,sc7280"; }; + +&lpass_va_macro { + vdd-micb-supply = <&pp1800_l2c>; +}; + +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "VA DMIC2", "vdd-micb", + "VA DMIC3", "vdd-micb", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + +}; -- 2.31.0
