Make trivial changes on the binding. - Update title to include MT7531 switch. - Add me as a maintainer. List maintainers in alphabetical order by first name. - Add description to compatible strings. - Stretch descriptions up to the 80 character limit. - Remove quotes from $ref: "dsa.yaml#". Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- .../bindings/net/dsa/mediatek,mt7530.yaml | 36 ++++++++++++------- 1 file changed, 24 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 17ab6c69ecc7..edf48e917173 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -4,12 +4,13 @@ $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7530 Ethernet switch +title: Mediatek MT7530 and MT7531 Ethernet Switches maintainers: - - Sean Wang <sean.wang@xxxxxxxxxxxx> + - Arınç ÜNAL <arinc.unal@xxxxxxxxxx> - Landen Chao <Landen.Chao@xxxxxxxxxxxx> - DENG Qingfang <dqfext@xxxxxxxxx> + - Sean Wang <sean.wang@xxxxxxxxxxxx> description: | Port 5 of mt7530 and mt7621 switch is muxed between: @@ -61,10 +62,21 @@ description: | properties: compatible: - enum: - - mediatek,mt7530 - - mediatek,mt7531 - - mediatek,mt7621 + oneOf: + - description: + Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC + items: + - const: mediatek,mt7530 + + - description: + Standalone MT7531 + items: + - const: mediatek,mt7531 + + - description: + Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs + items: + - const: mediatek,mt7621 reg: maxItems: 1 @@ -79,7 +91,7 @@ properties: gpio-controller: type: boolean description: - if defined, MT7530's LED controller will run on GPIO mode. + If defined, MT7530's LED controller will run on GPIO mode. "#interrupt-cells": const: 1 @@ -92,8 +104,8 @@ properties: io-supply: description: Phandle to the regulator node necessary for the I/O power. - See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt - for details for the regulator setup on these boards. + See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for + details for the regulator setup on these boards. mediatek,mcm: type: boolean @@ -110,8 +122,8 @@ properties: resets: description: - Phandle pointing to the system reset controller with line index for - the ethsys. + Phandle pointing to the system reset controller with line index for the + ethsys. maxItems: 1 patternProperties: @@ -148,7 +160,7 @@ required: - reg allOf: - - $ref: "dsa.yaml#" + - $ref: dsa.yaml# - if: required: - mediatek,mcm -- 2.34.1
