On Mon, 06 Oct 2014, Jacob Pan wrote: > X-Powers AXP288 is a customized PMIC for Intel Baytrail-CR platforms. Similar > to AXP202/209, AXP288 comes with USB charger, more LDO and BUCK channels, and > AD converters. It also provides extended status and interrupt reporting > capabilities than the devices currently supported in axp20x.c. > > In addition to feature extension, this patch also adds ACPI binding for > enumeration. > > This consolidated driver should support more X-Powers' PMICs in both device > tree and ACPI enumerated platforms. > > Signed-off-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx> > Reviewed-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx> > --- > drivers/mfd/Kconfig | 3 +- > drivers/mfd/axp20x.c | 361 ++++++++++++++++++++++++++++++++++++++------- > include/linux/mfd/axp20x.h | 59 ++++++++ > 3 files changed, 367 insertions(+), 56 deletions(-) Applied with whitespace fixups. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index de5abf2..c183edb 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -74,7 +74,8 @@ config MFD_AXP20X > select REGMAP_IRQ > depends on I2C=y > help > - If you say Y here you get support for the X-Powers AXP202 and AXP209. > + If you say Y here you get support for the X-Powers AXP202, AXP209 and > + AXP288 power management IC (PMIC). > This driver include only the core APIs. You have to select individual > components like regulators or the PEK (Power Enable Key) under the > corresponding menus. > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index dee6539..69fd231 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -1,9 +1,9 @@ > /* > - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209 > + * axp20x.c - MFD core driver for the X-Powers' Power Management ICs > * > - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC > - * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature > - * as well as 4 configurable GPIOs. > + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC > + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature > + * as well as configurable GPIOs. > * > * Author: Carlo Caione <carlo@xxxxxxxxxx> > * > @@ -25,9 +25,16 @@ > #include <linux/mfd/core.h> > #include <linux/of_device.h> > #include <linux/of_irq.h> > +#include <linux/acpi.h> > > #define AXP20X_OFF 0x80 > > +static const char const *axp20x_model_names[] = { > + "AXP202", > + "AXP209", > + "AXP288", > +}; > + > static const struct regmap_range axp20x_writeable_ranges[] = { > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), > regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), > @@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = { > .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), > }; > > +static const struct regmap_range axp288_writeable_ranges[] = { > + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), > + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), > +}; > + > +static const struct regmap_range axp288_volatile_ranges[] = { > + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), > +}; > + > +static const struct regmap_access_table axp288_writeable_table = { > + .yes_ranges = axp288_writeable_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges), > +}; > + > +static const struct regmap_access_table axp288_volatile_table = { > + .yes_ranges = axp288_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), > +}; > + > static struct resource axp20x_pek_resources[] = { > { > .name = "PEK_DBR", > @@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = { > }, > }; > > +static struct resource axp288_battery_resources[] = { > + { > + .start = AXP288_IRQ_QWBTU, > + .end = AXP288_IRQ_QWBTU, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_WBTU, > + .end = AXP288_IRQ_WBTU, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_QWBTO, > + .end = AXP288_IRQ_QWBTO, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_WBTO, > + .end = AXP288_IRQ_WBTO, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_WL2, > + .end = AXP288_IRQ_WL2, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_WL1, > + .end = AXP288_IRQ_WL1, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > static const struct regmap_config axp20x_regmap_config = { > .reg_bits = 8, > .val_bits = 8, > @@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = { > .cache_type = REGCACHE_RBTREE, > }; > > -#define AXP20X_IRQ(_irq, _off, _mask) \ > - [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } > +static const struct regmap_config axp288_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .wr_table = &axp288_writeable_table, > + .volatile_table = &axp288_volatile_table, > + .max_register = AXP288_FG_TUNE5, > + .cache_type = REGCACHE_RBTREE, > +}; > + > +#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ > + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } > > static const struct regmap_irq axp20x_regmap_irqs[] = { > - AXP20X_IRQ(ACIN_OVER_V, 0, 7), > - AXP20X_IRQ(ACIN_PLUGIN, 0, 6), > - AXP20X_IRQ(ACIN_REMOVAL, 0, 5), > - AXP20X_IRQ(VBUS_OVER_V, 0, 4), > - AXP20X_IRQ(VBUS_PLUGIN, 0, 3), > - AXP20X_IRQ(VBUS_REMOVAL, 0, 2), > - AXP20X_IRQ(VBUS_V_LOW, 0, 1), > - AXP20X_IRQ(BATT_PLUGIN, 1, 7), > - AXP20X_IRQ(BATT_REMOVAL, 1, 6), > - AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5), > - AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4), > - AXP20X_IRQ(CHARG, 1, 3), > - AXP20X_IRQ(CHARG_DONE, 1, 2), > - AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1), > - AXP20X_IRQ(BATT_TEMP_LOW, 1, 0), > - AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7), > - AXP20X_IRQ(CHARG_I_LOW, 2, 6), > - AXP20X_IRQ(DCDC1_V_LONG, 2, 5), > - AXP20X_IRQ(DCDC2_V_LONG, 2, 4), > - AXP20X_IRQ(DCDC3_V_LONG, 2, 3), > - AXP20X_IRQ(PEK_SHORT, 2, 1), > - AXP20X_IRQ(PEK_LONG, 2, 0), > - AXP20X_IRQ(N_OE_PWR_ON, 3, 7), > - AXP20X_IRQ(N_OE_PWR_OFF, 3, 6), > - AXP20X_IRQ(VBUS_VALID, 3, 5), > - AXP20X_IRQ(VBUS_NOT_VALID, 3, 4), > - AXP20X_IRQ(VBUS_SESS_VALID, 3, 3), > - AXP20X_IRQ(VBUS_SESS_END, 3, 2), > - AXP20X_IRQ(LOW_PWR_LVL1, 3, 1), > - AXP20X_IRQ(LOW_PWR_LVL2, 3, 0), > - AXP20X_IRQ(TIMER, 4, 7), > - AXP20X_IRQ(PEK_RIS_EDGE, 4, 6), > - AXP20X_IRQ(PEK_FAL_EDGE, 4, 5), > - AXP20X_IRQ(GPIO3_INPUT, 4, 3), > - AXP20X_IRQ(GPIO2_INPUT, 4, 2), > - AXP20X_IRQ(GPIO1_INPUT, 4, 1), > - AXP20X_IRQ(GPIO0_INPUT, 4, 0), > + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), > + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), > + INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5), > + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), > + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), > + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), > + INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1), > + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), > + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), > + INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5), > + INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4), > + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), > + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), > + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1), > + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0), > + INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7), > + INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6), > + INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5), > + INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4), > + INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3), > + INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1), > + INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0), > + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7), > + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6), > + INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5), > + INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4), > + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3), > + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2), > + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1), > + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0), > + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), > + INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6), > + INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5), > + INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3), > + INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2), > + INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1), > + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), > +}; > + > +/* some IRQs are compatible with axp20x models */ > +static const struct regmap_irq axp288_regmap_irqs[] = { > + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), > + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), > + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), > + > + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), > + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), > + INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), > + INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), > + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), > + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), > + > + INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), > + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), > + INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), > + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3), > + INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), > + INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), > + INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), > + INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7), > + > + INIT_REGMAP_IRQ(AXP288, WL2, 3, 0), > + INIT_REGMAP_IRQ(AXP288, WL1, 3, 1), > + INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2), > + INIT_REGMAP_IRQ(AXP288, OT, 3, 7), > + > + INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0), > + INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1), > + INIT_REGMAP_IRQ(AXP288, POKO, 4, 2), > + INIT_REGMAP_IRQ(AXP288, POKL, 4, 3), > + INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), > + INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), > + INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), > + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), > + > + INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), > + INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), > }; > > static const struct of_device_id axp20x_of_match[] = { > @@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); > > +static struct acpi_device_id axp20x_acpi_match[] = { > + { > + .id = "INT33F4", > + .driver_data = AXP288_ID, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); > + > static const struct regmap_irq_chip axp20x_regmap_irq_chip = { > .name = "axp20x_irq_chip", > .status_base = AXP20X_IRQ1_STATE, > .ack_base = AXP20X_IRQ1_STATE, > .mask_base = AXP20X_IRQ1_EN, > - .num_regs = 5, > + .mask_invert = true, > + .init_ack_masked = true, > .irqs = axp20x_regmap_irqs, > .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), > + .num_regs = 5, > + > +}; > + > +static const struct regmap_irq_chip axp288_regmap_irq_chip = { > + .name = "axp288_irq_chip", > + .status_base = AXP20X_IRQ1_STATE, > + .ack_base = AXP20X_IRQ1_STATE, > + .mask_base = AXP20X_IRQ1_EN, > .mask_invert = true, > .init_ack_masked = true, > + .irqs = axp288_regmap_irqs, > + .num_irqs = ARRAY_SIZE(axp288_regmap_irqs), > + .num_regs = 6, > + > }; > > static const char * const axp20x_supplies[] = { > @@ -161,36 +292,155 @@ static struct mfd_cell axp20x_cells[] = { > }, > }; > > +static struct resource axp288_adc_resources[] = { > + { > + .name = "GPADC", > + .start = AXP288_IRQ_GPADC, > + .end = AXP288_IRQ_GPADC, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > +static struct resource axp288_charger_resources[] = { > + { > + .start = AXP288_IRQ_OV, > + .end = AXP288_IRQ_OV, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_DONE, > + .end = AXP288_IRQ_DONE, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_CHARGING, > + .end = AXP288_IRQ_CHARGING, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_SAFE_QUIT, > + .end = AXP288_IRQ_SAFE_QUIT, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_SAFE_ENTER, > + .end = AXP288_IRQ_SAFE_ENTER, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_QCBTU, > + .end = AXP288_IRQ_QCBTU, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_CBTU, > + .end = AXP288_IRQ_CBTU, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_QCBTO, > + .end = AXP288_IRQ_QCBTO, > + .flags = IORESOURCE_IRQ, > + }, > + { > + .start = AXP288_IRQ_CBTO, > + .end = AXP288_IRQ_CBTO, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > +static struct mfd_cell axp288_cells[] = { > + { > + .name = "axp288_adc", > + .num_resources = ARRAY_SIZE(axp288_adc_resources), > + .resources = axp288_adc_resources, > + }, > + { > + .name = "axp288_charger", > + .num_resources = ARRAY_SIZE(axp288_charger_resources), > + .resources = axp288_charger_resources, > + }, > + { > + .name = "axp288_battery", > + .num_resources = ARRAY_SIZE(axp288_battery_resources), > + .resources = axp288_battery_resources, > + }, > +}; > + > static struct axp20x_dev *axp20x_pm_power_off; > static void axp20x_power_off(void) > { > + if (axp20x_pm_power_off->variant == AXP288_ID) > + return; > + > regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, > AXP20X_OFF); > } > > +static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) > +{ > + const struct acpi_device_id *acpi_id; > + const struct of_device_id *of_id; > + > + if (dev->of_node) { > + of_id = of_match_device(axp20x_of_match, dev); > + if (!of_id) { > + dev_err(dev, "Unable to match OF ID\n"); > + return -ENODEV; > + } > + axp20x->variant = (long) of_id->data; > + } else { > + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); > + if (!acpi_id || !acpi_id->driver_data) { > + dev_err(dev, "Unable to match ACPI ID and data\n"); > + return -ENODEV; > + } > + axp20x->variant = (long) acpi_id->driver_data; > + } > + > + switch (axp20x->variant) { > + case AXP202_ID: > + case AXP209_ID: > + axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); > + axp20x->cells = axp20x_cells; > + axp20x->regmap_cfg = &axp20x_regmap_config; > + axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; > + break; > + case AXP288_ID: > + axp20x->cells = axp288_cells; > + axp20x->nr_cells = ARRAY_SIZE(axp288_cells); > + axp20x->regmap_cfg = &axp288_regmap_config; > + axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; > + break; > + default: > + dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); > + return -EINVAL; > + } > + dev_info(dev, "AXP20x variant %s found\n", > + axp20x_model_names[axp20x->variant]); > + > + return 0; > +} > + > static int axp20x_i2c_probe(struct i2c_client *i2c, > const struct i2c_device_id *id) > { > struct axp20x_dev *axp20x; > - const struct of_device_id *of_id; > int ret; > > axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); > if (!axp20x) > return -ENOMEM; > > - of_id = of_match_device(axp20x_of_match, &i2c->dev); > - if (!of_id) { > - dev_err(&i2c->dev, "Unable to setup AXP20X data\n"); > - return -ENODEV; > - } > - axp20x->variant = (long) of_id->data; > + ret = axp20x_match_device(axp20x, &i2c->dev); > + if (ret) > + return ret; > > axp20x->i2c_client = i2c; > axp20x->dev = &i2c->dev; > dev_set_drvdata(axp20x->dev, axp20x); > > - axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config); > + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); > if (IS_ERR(axp20x->regmap)) { > ret = PTR_ERR(axp20x->regmap); > dev_err(&i2c->dev, "regmap init failed: %d\n", ret); > @@ -199,15 +449,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, > > ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, > IRQF_ONESHOT | IRQF_SHARED, -1, > - &axp20x_regmap_irq_chip, > + axp20x->regmap_irq_chip, > &axp20x->regmap_irqc); > if (ret) { > dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); > return ret; > } > > - ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells, > - ARRAY_SIZE(axp20x_cells), NULL, 0, NULL); > + ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, > + axp20x->nr_cells, NULL, 0, NULL); > > if (ret) { > dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); > @@ -245,6 +495,7 @@ static struct i2c_driver axp20x_i2c_driver = { > .name = "axp20x", > .owner = THIS_MODULE, > .of_match_table = of_match_ptr(axp20x_of_match), > + .acpi_match_table = ACPI_PTR(axp20x_acpi_match), > }, > .probe = axp20x_i2c_probe, > .remove = axp20x_i2c_remove, > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index d0e31a2..81589d1 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -14,6 +14,8 @@ > enum { > AXP202_ID = 0, > AXP209_ID, > + AXP288_ID, > + NR_AXP20X_VARIANTS, > }; > > #define AXP20X_DATACACHE(m) (0x04 + (m)) > @@ -49,11 +51,13 @@ enum { > #define AXP20X_IRQ3_EN 0x42 > #define AXP20X_IRQ4_EN 0x43 > #define AXP20X_IRQ5_EN 0x44 > +#define AXP20X_IRQ6_EN 0x45 > #define AXP20X_IRQ1_STATE 0x48 > #define AXP20X_IRQ2_STATE 0x49 > #define AXP20X_IRQ3_STATE 0x4a > #define AXP20X_IRQ4_STATE 0x4b > #define AXP20X_IRQ5_STATE 0x4c > +#define AXP20X_IRQ6_STATE 0x4d > > /* ADC */ > #define AXP20X_ACIN_V_ADC_H 0x56 > @@ -116,6 +120,15 @@ enum { > #define AXP20X_CC_CTRL 0xb8 > #define AXP20X_FG_RES 0xb9 > > +/* AXP288 specific registers */ > +#define AXP288_PMIC_ADC_H 0x56 > +#define AXP288_PMIC_ADC_L 0x57 > +#define AXP288_ADC_TS_PIN_CTRL 0x84 > + > +#define AXP288_PMIC_ADC_EN 0x84 > +#define AXP288_FG_TUNE5 0xed > + > + > /* Regulators IDs */ > enum { > AXP20X_LDO1 = 0, > @@ -169,12 +182,58 @@ enum { > AXP20X_IRQ_GPIO0_INPUT, > }; > > +enum axp288_irqs { > + AXP288_IRQ_VBUS_FALL = 2, > + AXP288_IRQ_VBUS_RISE, > + AXP288_IRQ_OV, > + AXP288_IRQ_FALLING_ALT, > + AXP288_IRQ_RISING_ALT, > + AXP288_IRQ_OV_ALT, > + AXP288_IRQ_DONE = 10, > + AXP288_IRQ_CHARGING, > + AXP288_IRQ_SAFE_QUIT, > + AXP288_IRQ_SAFE_ENTER, > + AXP288_IRQ_ABSENT, > + AXP288_IRQ_APPEND, > + AXP288_IRQ_QWBTU, > + AXP288_IRQ_WBTU, > + AXP288_IRQ_QWBTO, > + AXP288_IRQ_WBTO, > + AXP288_IRQ_QCBTU, > + AXP288_IRQ_CBTU, > + AXP288_IRQ_QCBTO, > + AXP288_IRQ_CBTO, > + AXP288_IRQ_WL2, > + AXP288_IRQ_WL1, > + AXP288_IRQ_GPADC, > + AXP288_IRQ_OT = 31, > + AXP288_IRQ_GPIO0, > + AXP288_IRQ_GPIO1, > + AXP288_IRQ_POKO, > + AXP288_IRQ_POKL, > + AXP288_IRQ_POKS, > + AXP288_IRQ_POKN, > + AXP288_IRQ_POKP, > + AXP288_IRQ_TIMER, > + AXP288_IRQ_MV_CHNG, > + AXP288_IRQ_BC_USB_CHNG, > +}; > + > +#define AXP288_TS_ADC_H 0x58 > +#define AXP288_TS_ADC_L 0x59 > +#define AXP288_GP_ADC_H 0x5a > +#define AXP288_GP_ADC_L 0x5b > + > struct axp20x_dev { > struct device *dev; > struct i2c_client *i2c_client; > struct regmap *regmap; > struct regmap_irq_chip_data *regmap_irqc; > long variant; > + int nr_cells; > + struct mfd_cell *cells; > + const struct regmap_config *regmap_cfg; > + const struct regmap_irq_chip *regmap_irq_chip; > }; > > #endif /* __LINUX_MFD_AXP20X_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html