Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps") the phy-mode must be set otherwise the switch driver will assume "NA" mode and invalidate the port. Fixes: 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps") Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 24737e89038a..96cac0f969a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -626,24 +626,28 @@ ports { lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; -- 2.25.1