Hi,
The RZ/V2M SoC is very similar to the R-Car implementation.
The differences are that a few DRD related registers and bits have
moved, there is a separate interrupt for DRD, an additional clock for
register access and reset lines for DRD and USBP.
Thanks
Phil
v3:
bindings:
- Keep the existing constraints by adding an 'else' clause with
'maxItems: 1' for various properties.
driver:
- The ramsize_per_ramif specifies the amount of ram for
IN _or_ OUT pipes, not combined, so it should be 16KB.
- When changing role, ensure only one of host/perip reset is deasserted
- Correct number of pipes to 16. The driver will calculate the nr
of pipes to use based on the available ram and ramsize_per_pipe.
v2:
bindings:
- SoCs other than rz/v2m must limit the number of clock/interrupt names
- Add "Battery Charging" and "Global Purpose Input" interrupts
driver:
- Rename r9a09g011 feature to is_rzv2m; use rzv2m compat string
- Pass pointer into macros that access is_rzv2m member
Phil Edworthy (2):
dt-bindings: usb: renesas, usb3-peri: Document RZ/V2M r9a09g011
support
usb: gadget: udc: renesas_usb3: Add support for RZ/V2M
.../bindings/usb/renesas,usb3-peri.yaml | 99 +++++++++++--
drivers/usb/gadget/udc/renesas_usb3.c | 131 ++++++++++++++----
2 files changed, 188 insertions(+), 42 deletions(-)
--
2.34.1
