On Mon, 6 Oct 2014 14:40:15 +0200
Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
> On Mon, Oct 06, 2014 at 02:25:38PM +0200, Boris Brezillon wrote:
> > On Mon, 6 Oct 2014 13:01:16 +0200 Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
> > > On Wed, Oct 01, 2014 at 04:53:07PM +0200, Boris Brezillon wrote:
> > > [...]
> > > > diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
> [...]
> > > > + backlight = <&backlight>;
> > > > + power-supply = <&panel_reg>;
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > + status = "disabled";
> > > > +
> > > > + port@0 {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + panel_input: endpoint@0 {
> > > > + reg = <0>;
> > > > + remote-endpoint = <&hlcdc_panel_output>;
> > > > + };
> > > > };
> > >
> > > There's no support for OF graphs in simple-panel, so this is unused,
> > > isn't it?
> >
> > Actually I use it in my atmel_hlcdc_ouput implementation to figure out
> > the link between a panel and a device connected on the RGB/DPI bus.
>
> That's kind of weird and one of the reasons why I can't make myself like
> the OF graph bindings. It requires drivers for one device to reach into
> the device tree node of some other device and look for content. Or put
> another way, a DT node for a panel that works on one platform doesn't
> work on another because the display controller needs additional DT
> content that isn't required by the original binding for the panel.
I also have a working POC of a DPI bus implementation (with DPI support
in panel-simple driver).
This is a solution I developed to provide a generic DPI implementation
in my HLCDC driver and rely on generic external implementations for
slave devices (panels, encoders, ...).
But, IIRC, Laurent was not in favor of a bus approach because the DPI
bus is just a data bus and not a control bus.
Anyway, I'll clean it up and post an RFC.
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
