Re: [PATCH 4/8] usb: dwc3: qcom: fix runtime PM wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 04, 2022 at 08:35:10AM -0700, Matthias Kaehlcke wrote:
> On Thu, Aug 04, 2022 at 09:35:16AM +0200, Johan Hovold wrote:

> After enabling runtime suspend for the dwc3 core, dwc3 glue and the xHCI
> the dwc3-qcom enters autosuspend when the delay expires.
> 
> > And the controller is resumed in the wakeup-interrupt handler for the
> > runtime PM case.
> >
> > It seems to work ok, and it looks like the driver has supported this
> > since it was first merged.
> 
> With and without your patch dwc3-qcom enters autosuspend and stays there.
> USB devices like a mouse or a USB to Ethernet adapter keep working while
> the glue is suspended.

Are you sure you're looking at the right controller? And that it is
actually suspended?

If you plug in a keyboard, enable autosuspend for all devices in the
path (from glue to the keyboard device) and type away, then the
controller must remain active. Stop typing, and all devices in the chain
should suspend.

> How is the runtime resume triggered for the dwc3 glue?

Either by the host driver when it needs to access the device, or by the
device if it is remote-wakeup capable (e.g. a keyboard, but not
necessarily a speaker).

Note that the latter part is what is broken currently as the wakeup
interrupts were not enabled and those are needed to wake up sc8280xp 
when the dwc3 glue has been runtime suspended.

Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux