Re: [v1] drm/msm/disp/dpu1: add support for hierarchical flush for dspp in sc7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 4 Aug 2022 at 13:29, Kalyan Thota <quic_kalyant@xxxxxxxxxxx> wrote:
>
> Flush mechanism for DSPP blocks has changed in sc7280 family, it
> allows individual sub blocks to be flushed in coordination with
> master flush control.
>
> representation: master_flush && (PCC_flush | IGC_flush .. etc )
>
> This change adds necessary support for the above design.
>
> Signed-off-by: Kalyan Thota <quic_kalyant@xxxxxxxxxxx>

I'd like to land at least patches 6-8 from [1] next cycle. They clean
up the CTL interface. Could you please rebase your patch on top of
them?

[1] https://patchwork.freedesktop.org/series/99909/

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c       |  4 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  5 +++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  2 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c     | 40 +++++++++++++++++++++++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h     |  3 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h    |  7 +++++
>  6 files changed, 59 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 7763558..4eca317 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -703,6 +703,10 @@ static void _dpu_crtc_setup_cp_blocks(struct drm_crtc *crtc)
>                 mixer[i].flush_mask |= ctl->ops.get_bitmask_dspp(ctl,
>                         mixer[i].hw_dspp->idx);
>
> +               if(ctl->ops.set_dspp_hierarchical_flush)
> +                       ctl->ops.set_dspp_hierarchical_flush(ctl,
> +                                               mixer[i].hw_dspp->idx, DSPP_SUB_PCC);
> +
>                 /* stage config flush mask */
>                 ctl->ops.update_pending_flush(ctl, mixer[i].flush_mask);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 021eb2f..3b27a87 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -58,7 +58,10 @@
>         (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>
>  #define CTL_SC7280_MASK \
> -       (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG))
> +       (BIT(DPU_CTL_ACTIVE_CFG) | \
> +        BIT(DPU_CTL_FETCH_ACTIVE) | \
> +        BIT(DPU_CTL_VM_CFG) | \
> +        BIT(DPU_CTL_HIERARCHICAL_FLUSH))
>
>  #define MERGE_3D_SM8150_MASK (0)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index b85b24b..7922f6c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -185,6 +185,7 @@ enum {
>   * @DPU_CTL_SPLIT_DISPLAY:     CTL supports video mode split display
>   * @DPU_CTL_FETCH_ACTIVE:      Active CTL for fetch HW (SSPPs)
>   * @DPU_CTL_VM_CFG:            CTL config to support multiple VMs
> + * @DPU_CTL_HIERARCHICAL_FLUSH: CTL config to support hierarchical flush
>   * @DPU_CTL_MAX
>   */
>  enum {
> @@ -192,6 +193,7 @@ enum {
>         DPU_CTL_ACTIVE_CFG,
>         DPU_CTL_FETCH_ACTIVE,
>         DPU_CTL_VM_CFG,
> +       DPU_CTL_HIERARCHICAL_FLUSH,
>         DPU_CTL_MAX
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 3584f5e..b34fc30 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -28,6 +28,8 @@
>  #define   CTL_INTF_FLUSH                0x110
>  #define   CTL_INTF_MASTER               0x134
>  #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
> +#define   CTL_DSPP_0_FLUSH             0x13C

Please change to CTL_DSPP_n_FLUSH(n).

> +
>
>  #define CTL_MIXER_BORDER_OUT            BIT(24)
>  #define CTL_FLUSH_MASK_CTL              BIT(17)
> @@ -292,6 +294,36 @@ static uint32_t dpu_hw_ctl_get_bitmask_dspp(struct dpu_hw_ctl *ctx,
>         return flushbits;
>  }
>
> +static uint32_t dpu_hw_ctl_get_bitmask_dspp_v1(struct dpu_hw_ctl *ctx,
> +       enum dpu_dspp dspp)
> +{
> +       return BIT(29);
> +}
> +
> +static void dpu_hw_ctl_set_dspp_hierarchical_flush(struct dpu_hw_ctl *ctx,
> +       enum dpu_dspp dspp, enum dpu_dspp_sub_blk dspp_sub_blk)
> +{
> +       uint32_t flushbits = 0, active = 0;
> +
> +       switch (dspp_sub_blk) {
> +       case DSPP_SUB_IGC:
> +               flushbits = BIT(2);
> +               break;
> +       case DSPP_SUB_PCC:
> +               flushbits = BIT(4);
> +               break;
> +       case DSPP_SUB_GC:
> +               flushbits = BIT(5);
> +               break;
> +       default:
> +               return;
> +       }
> +
> +       active = DPU_REG_READ(&ctx->hw, CTL_DSPP_0_FLUSH + ((dspp - 1) * 4));

So that this line will be simpler to read.

> +
> +       DPU_REG_WRITE(&ctx->hw, CTL_DSPP_0_FLUSH + ((dspp - 1) * 4), active | flushbits);
> +}
> +
>  static u32 dpu_hw_ctl_poll_reset_status(struct dpu_hw_ctl *ctx, u32 timeout_us)
>  {
>         struct dpu_hw_blk_reg_map *c = &ctx->hw;
> @@ -600,7 +632,13 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
>         ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
>         ops->get_bitmask_sspp = dpu_hw_ctl_get_bitmask_sspp;
>         ops->get_bitmask_mixer = dpu_hw_ctl_get_bitmask_mixer;
> -       ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp;
> +       if (cap & BIT(DPU_CTL_HIERARCHICAL_FLUSH)) {
> +               ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp_v1;

We have used _v1 for active CTLs. What is the relationship between
CTL_HIERARCHILCAL_FLUSH and active CTLs?

> +               ops->set_dspp_hierarchical_flush = dpu_hw_ctl_set_dspp_hierarchical_flush;
> +       } else {
> +               ops->get_bitmask_dspp = dpu_hw_ctl_get_bitmask_dspp;
> +       }
> +
>         if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
>                 ops->set_active_pipes = dpu_hw_ctl_set_fetch_pipe_active;
>  };
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index ac15444..8ecab91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -160,6 +160,9 @@ struct dpu_hw_ctl_ops {
>         uint32_t (*get_bitmask_dspp)(struct dpu_hw_ctl *ctx,
>                 enum dpu_dspp blk);
>
> +       void (*set_dspp_hierarchical_flush)(struct dpu_hw_ctl *ctx,
> +               enum dpu_dspp blk, enum dpu_dspp_sub_blk dspp_sub_blk);

The word "hierarchical" means particular (internal) implementation.
Please change to something like set_dspp_block_flush().
Or with [2] in place, it can be hidden in the
update_pending_flush_dspp() function. Just pass the subblock to the
function and let the dpu_hw_ctl care about it.

[2] https://patchwork.freedesktop.org/patch/473159/?series=99909&rev=1


> +
>         /**
>          * Set all blend stages to disabled
>          * @ctx       : ctl path ctx pointer
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index bb9cead..561e2ab 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -166,6 +166,13 @@ enum dpu_dspp {
>         DSPP_MAX
>  };
>
> +enum dpu_dspp_sub_blk{
> +       DSPP_SUB_PCC = 1,
> +       DSPP_SUB_IGC,
> +       DSPP_SUB_GC,
> +       DSPP_SUB_MAX
> +};

I'd prefer if we can use DPU_DSPP_* definitions instead.

> +
>  enum dpu_ctl {
>         CTL_0 = 1,
>         CTL_1,



-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux