On 6/28/22 20:18, Max Krummenacher wrote:
Hello Max,
[...]
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
index dae0676b5c6e..52f5db03b6a8 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -26,7 +26,28 @@ properties:
height-mm: true
label: true
panel-timing: true
- port: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description:
+ Input port node, receives the panel data.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+
+ properties:
+ bus-format:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x1001
+ maximum: 0x1fff
+ description: |
+ Describes how the display panel is connected to the display interface.
+ Valid values are defined in <dt-bindings/display/dt-media-bus-format.h>.
+ The mapping between the color/significance of the panel lines to the
+ parallel data lines are defined in:
+ https://www.kernel.org/doc/html/v5.17/userspace-api/media/v4l/subdev-formats.html#packed-rgb-formats
I am not sure whether I should re-open this discussion, but I still
wonder, wouldn't it be better to describe the DPI bus color channel
ordering (RGB, BGR, ...), width of each color channel in bits, pixel
format (RGB, YUV, ...) instead of using specific constants for the
entire format ?
