Re: [PATCH v3] ASoC: dt-bindings: fsl,sai: Convert format to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/07/2022 04:10, Shengjiu Wang wrote:
> Convert the NXP SAI binding to DT schema format using json-schema.
> 
> The Synchronous Audio Interface (SAI) provides an interface that
> supports full-duplex serial interfaces with frame synchronization
> formats such as I2S, AC97, TDM, and codec/DSP interfaces.
> 
> Beside conversion, 'fsl,shared-interrupt' and '#sound-dai-cells'
> are added for they are already used by some dts.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> ---
> changes in v3
> - address comments from Krzysztof
> 
> changes in v2
> - fix exclusive property issue
> - fix order issue of compatible, clock-names, dma-names
> 
>  .../devicetree/bindings/sound/fsl,sai.yaml    | 221 ++++++++++++++++++
>  .../devicetree/bindings/sound/fsl-sai.txt     |  95 --------
>  2 files changed, 221 insertions(+), 95 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,sai.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
> new file mode 100644
> index 000000000000..86ee46755b0c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
> @@ -0,0 +1,221 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale Synchronous Audio Interface (SAI).
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@xxxxxxx>
> +
> +description: |
> +  The SAI is based on I2S module that used communicating with audio codecs,
> +  which provides a synchronous audio interface that supports fullduplex
> +  serial interfaces with frame synchronization such as I2S, AC97, TDM, and
> +  codec/DSP interfaces.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,vf610-sai
> +          - fsl,imx6sx-sai
> +          - fsl,imx6ul-sai
> +          - fsl,imx7ulp-sai
> +          - fsl,imx8mq-sai
> +          - fsl,imx8qm-sai
> +          - fsl,imx8ulp-sai
> +      - items:
> +          - enum:
> +              - fsl,imx8mm-sai
> +              - fsl,imx8mn-sai
> +              - fsl,imx8mp-sai
> +          - const: fsl,imx8mq-sai
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: receive and transmit interrupt
> +
> +  dmas:
> +    maxItems: 2
> +
> +  dma-names:
> +    maxItems: 2
> +
> +  clocks:
> +    items:
> +      - description: The ipg clock for register access
> +      - description: master clock source 0 (obsoleted)
> +      - description: master clock source 1
> +      - description: master clock source 2
> +      - description: master clock source 3
> +      - description: PLL clock source for 8kHz series
> +      - description: PLL clock source for 11kHz series
> +    minItems: 4
> +
> +  clock-names:
> +    oneOf:
> +      - items:
> +          - const: bus
> +          - const: mclk0
> +          - const: mclk1
> +          - const: mclk2
> +          - const: mclk3
> +          - const: pll8k
> +          - const: pll11k
> +        minItems: 4
> +      - items:
> +          - const: bus
> +          - const: mclk1
> +          - const: mclk2
> +          - const: mclk3
> +          - const: pll8k
> +          - const: pll11k
> +        minItems: 4
> +
> +  lsb-first:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      Configures whether the LSB or the MSB is transmitted
> +      first for the fifo data. If this property is absent,
> +      the MSB is transmitted first as default, or the LSB
> +      is transmitted first.
> +    type: boolean

The type: boolean goes instead of $ref, not additionally to it. Just
like below...

> +
> +  big-endian:
> +    description: |
> +      required if all the SAI registers are big-endian rather than little-endian.
> +    type: boolean

... be consistent.

> +
> +  fsl,sai-synchronous-rx:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: |
> +      SAI will work in the synchronous mode (sync Tx with Rx) which means
> +      both the transmitter and the receiver will send and receive data by
> +      following receiver's bit clocks and frame sync clocks.
> +    type: boolean
> +

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux