Add DDR PMU device node for G12 series SoC
Signed-off-by: Jiucheng Xu <jiucheng.xu@xxxxxxxxxxx>
---
Changes v2 -> v3:
- No change
Changes v1 -> v2:
- Remove model, dmc_nr, chann_nr properties
- Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
identifier
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 4 ++++
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 ++++
4 files changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 45947c1031c4..7e556fe575be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
};
};
+ ddr_pmu: ddr_pmu@ff638000 {
+ compatible = "amlogic,g12-ddr-pmu";
+ reg = <0x0 0xff638000 0x0 0x100
+ 0x0 0xff638c00 0x0 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
reg = <0x0 0xffc01000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fb0ab27d1f64..4a32e081e70e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -133,3 +133,7 @@ map1 {
};
};
};
+
+&ddr_pmu {
+ compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index ee8fcae9f9f0..d91eca5a9afc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -139,3 +139,7 @@ map1 {
&mali {
dma-coherent;
};
+
+&ddr_pmu {
+ compatible = "amlogic,g12b-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 80737731af3f..7d62c661fde5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -543,3 +543,7 @@ &vpu {
&usb {
power-domains = <&pwrc PWRC_SM1_USB_ID>;
};
+
+&ddr_pmu {
+ compatible = "amlogic,sm1-ddr-pmu";
+};
--
2.25.1
