[PATCH 2/4] dt-bindings: net: dsa: mediatek,mt7530: update examples

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update the examples on the binding.

- Add examples which include a wide variation of configurations.
- Make example comments YAML comment instead of DT binding comment.
- Define examples from platform to make the bindings clearer.
- Add interrupt controller to the examples. Include header file for
interrupt.
- Change reset line for MT7621 examples.
- Pretty formatting for the examples.
- Change switch reg to 0.
- Change port labels to fit the example, change port 4 label to wan.
- Change ethernet-ports to ports.

Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 661 +++++++++++++-----
 1 file changed, 500 insertions(+), 161 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 541984a7d2d4..479e292cb2af 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -186,144 +186,374 @@ allOf:
 unevaluatedProperties: false
 
 examples:
+  # Example 1: Standalone MT7530
   - |
     #include <dt-bindings/gpio/gpio.h>
-    mdio {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        switch@0 {
-            compatible = "mediatek,mt7530";
-            reg = <0>;
-
-            core-supply = <&mt6323_vpa_reg>;
-            io-supply = <&mt6323_vemc3v3_reg>;
-            reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-
-            ethernet-ports {
+
+    platform {
+        ethernet {
+            mdio {
                 #address-cells = <1>;
                 #size-cells = <0>;
-                port@0 {
+
+                switch@0 {
+                    compatible = "mediatek,mt7530";
                     reg = <0>;
-                    label = "lan0";
-                };
 
-                port@1 {
-                    reg = <1>;
-                    label = "lan1";
-                };
+                    reset-gpios = <&pio 33 0>;
 
-                port@2 {
-                    reg = <2>;
-                    label = "lan2";
-                };
+                    core-supply = <&mt6323_vpa_reg>;
+                    io-supply = <&mt6323_vemc3v3_reg>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
-                port@3 {
-                    reg = <3>;
-                    label = "lan3";
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "rgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
+                        };
+                    };
                 };
+            };
+        };
+    };
 
-                port@4 {
-                    reg = <4>;
-                    label = "wan";
+  # Example 2: MT7530 in MT7623AI SoC
+  - |
+    #include <dt-bindings/reset/mt2701-resets.h>
+
+    platform {
+        ethernet {
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                switch@0 {
+                    compatible = "mediatek,mt7530";
+                    reg = <0>;
+
+                    mediatek,mcm;
+                    resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+                    reset-names = "mcm";
+
+                    core-supply = <&mt6323_vpa_reg>;
+                    io-supply = <&mt6323_vemc3v3_reg>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "trgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
+                        };
+                    };
                 };
+            };
+        };
+    };
+
+  # Example 3: Standalone MT7531
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+        ethernet {
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                switch@0 {
+                    compatible = "mediatek,mt7531";
+                    reg = <0>;
+
+                    reset-gpios = <&pio 54 0>;
+
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&pio>;
+                    interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
 
-                port@6 {
-                    reg = <6>;
-                    label = "cpu";
-                    ethernet = <&gmac0>;
-                    phy-mode = "trgmii";
-                    fixed-link {
-                        speed = <1000>;
-                        full-duplex;
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "2500base-x";
+
+                            fixed-link {
+                                speed = <2500>;
+                                full-duplex;
+                                pause;
+                            };
+                        };
                     };
                 };
             };
         };
     };
 
+  # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
   - |
-    //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
-
-    ethernet {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        gmac0: mac@0 {
-            compatible = "mediatek,eth-mac";
-            reg = <0>;
-            phy-mode = "rgmii";
-
-            fixed-link {
-                speed = <1000>;
-                full-duplex;
-                pause;
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    platform {
+        ethernet {
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                switch@0 {
+                    compatible = "mediatek,mt7621";
+                    reg = <0>;
+
+                    mediatek,mcm;
+                    resets = <&sysc MT7621_RST_MCM>;
+                    reset-names = "mcm";
+
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&gic>;
+                    interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "trgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
+                        };
+                    };
+                };
             };
         };
+    };
 
-        gmac1: mac@1 {
-            compatible = "mediatek,eth-mac";
-            reg = <1>;
-            phy-mode = "rgmii-txid";
-            phy-handle = <&phy4>;
+  # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    platform {
+        pinctrl {
+            example5_rgmii2_pins: rgmii2-pins {
+                pinmux {
+                    groups = "rgmii2";
+                    function = "rgmii2";
+                };
+            };
         };
 
-        mdio: mdio-bus {
+        ethernet {
             #address-cells = <1>;
             #size-cells = <0>;
 
-            /* Internal phy */
-            phy4: ethernet-phy@4 {
-                reg = <4>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&example5_rgmii2_pins>;
+
+            mac@1 {
+                compatible = "mediatek,eth-mac";
+                reg = <1>;
+
+                phy-mode = "rgmii";
+                phy-handle = <&example5_ethphy4>;
             };
 
-            mt7530: switch@1f {
-                compatible = "mediatek,mt7621";
-                reg = <0x1f>;
-                mediatek,mcm;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-                resets = <&rstctrl 2>;
-                reset-names = "mcm";
+                /* MT7530's phy4 */
+                example5_ethphy4: ethernet-phy@4 {
+                    reg = <4>;
+                };
 
-                ethernet-ports {
-                    #address-cells = <1>;
-                    #size-cells = <0>;
+                switch@0 {
+                    compatible = "mediatek,mt7621";
+                    reg = <0>;
 
-                    port@0 {
-                        reg = <0>;
-                        label = "lan0";
-                    };
+                    mediatek,mcm;
+                    resets = <&sysc MT7621_RST_MCM>;
+                    reset-names = "mcm";
 
-                    port@1 {
-                        reg = <1>;
-                        label = "lan1";
-                    };
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&gic>;
+                    interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
-                    port@2 {
-                        reg = <2>;
-                        label = "lan2";
-                    };
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
-                    port@3 {
-                        reg = <3>;
-                        label = "lan3";
-                    };
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
 
-                    /* Commented out. Port 4 is handled by 2nd GMAC.
-                    port@4 {
-                        reg = <4>;
-                        label = "lan4";
-                    };
-                    */
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
 
-                    port@6 {
-                        reg = <6>;
-                        label = "cpu";
-                        ethernet = <&gmac0>;
-                        phy-mode = "rgmii";
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
 
-                        fixed-link {
-                            speed = <1000>;
-                            full-duplex;
-                            pause;
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        /* Commented out, phy4 is muxed to gmac1.
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+                        */
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "trgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
                         };
                     };
                 };
@@ -331,87 +561,196 @@ examples:
         };
     };
 
+  # Example 6: MT7621: mux external phy to SoC's gmac1
   - |
-    //Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
-
-    ethernet {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        gmac_0: mac@0 {
-            compatible = "mediatek,eth-mac";
-            reg = <0>;
-            phy-mode = "rgmii";
-
-            fixed-link {
-                speed = <1000>;
-                full-duplex;
-                pause;
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    platform {
+        pinctrl {
+            example6_rgmii2_pins: rgmii2-pins {
+                pinmux {
+                    groups = "rgmii2";
+                    function = "rgmii2";
+                };
             };
         };
 
-        mdio0: mdio-bus {
+        ethernet {
             #address-cells = <1>;
             #size-cells = <0>;
 
-            /* External phy */
-            ephy5: ethernet-phy@7 {
-                reg = <7>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&example6_rgmii2_pins>;
+
+            mac@1 {
+                compatible = "mediatek,eth-mac";
+                reg = <1>;
+
+                phy-mode = "rgmii";
             };
 
-            switch@1f {
-                compatible = "mediatek,mt7621";
-                reg = <0x1f>;
-                mediatek,mcm;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-                resets = <&rstctrl 2>;
-                reset-names = "mcm";
+                /* External PHY */
+                ethernet-phy@7 {
+                    reg = <7>;
+                    phy-mode = "rgmii";
+                };
 
-                ethernet-ports {
-                    #address-cells = <1>;
-                    #size-cells = <0>;
+                switch@0 {
+                    compatible = "mediatek,mt7621";
+                    reg = <0>;
 
-                    port@0 {
-                        reg = <0>;
-                        label = "lan0";
-                    };
+                    mediatek,mcm;
+                    resets = <&sysc MT7621_RST_MCM>;
+                    reset-names = "mcm";
 
-                    port@1 {
-                        reg = <1>;
-                        label = "lan1";
-                    };
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&gic>;
+                    interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
-                    port@2 {
-                        reg = <2>;
-                        label = "lan2";
-                    };
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
-                    port@3 {
-                        reg = <3>;
-                        label = "lan3";
-                    };
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
 
-                    port@4 {
-                        reg = <4>;
-                        label = "lan4";
-                    };
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
 
-                    port@5 {
-                        reg = <5>;
-                        label = "lan5";
-                        phy-mode = "rgmii";
-                        phy-handle = <&ephy5>;
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "trgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
+                        };
                     };
+                };
+            };
+        };
+    };
+
+  # Example 7: MT7621: mux external phy to MT7530's port 5
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    platform {
+        pinctrl {
+            example7_rgmii2_pins: rgmii2-pins {
+                pinmux {
+                    groups = "rgmii2";
+                    function = "gpio";
+                };
+            };
+        };
+
+        ethernet {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&example7_rgmii2_pins>;
 
-                    cpu_port0: port@6 {
-                        reg = <6>;
-                        label = "cpu";
-                        ethernet = <&gmac_0>;
-                        phy-mode = "rgmii";
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* External PHY */
+                ethernet-phy@7 {
+                    reg = <7>;
+                    phy-mode = "rgmii";
+                };
+
+                switch@0 {
+                    compatible = "mediatek,mt7621";
+                    reg = <0>;
+
+                    mediatek,mcm;
+                    resets = <&sysc MT7621_RST_MCM>;
+                    reset-names = "mcm";
+
+                    interrupt-controller;
+                    #interrupt-cells = <1>;
+                    interrupt-parent = <&gic>;
+                    interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            label = "lan1";
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            label = "lan2";
+                        };
+
+                        port@2 {
+                            reg = <2>;
+                            label = "lan3";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            label = "lan4";
+                        };
+
+                        port@4 {
+                            reg = <4>;
+                            label = "wan";
+                        };
+
+                        port@5 {
+                            reg = <5>;
+                            label = "extphy";
+                            phy-mode = "rgmii-txid";
+                        };
 
-                        fixed-link {
-                            speed = <1000>;
-                            full-duplex;
-                            pause;
+                        port@6 {
+                            reg = <6>;
+                            label = "cpu";
+                            ethernet = <&gmac0>;
+                            phy-mode = "trgmii";
+
+                            fixed-link {
+                                speed = <1000>;
+                                full-duplex;
+                                pause;
+                            };
                         };
                     };
                 };
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux