Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Technically, this depends on [1] merged to SPI tree, if we want to preserve existing behavior of not allowing SPI CPHA and CPOL in each of schemas in this patch. If this patch comes independently via different tree, the SPI CPHA and CPOL will be allowed for brief period of time, before [1] is merged. This will not have negative impact, just DT schema checks will be loosened for that period. [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@xxxxxxxxxx/ --- Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml | 4 ++-- Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml | 5 ++--- Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml | 7 ++++--- Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml | 7 ++++--- 4 files changed, 12 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 1bcaf6ba822c..a191a04e681c 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -58,7 +58,6 @@ properties: spi-cpha: true spi-cpol: true - spi-max-frequency: true required: - compatible @@ -85,6 +84,7 @@ allOf: contains: const: marvell,nfc-spi then: + $ref: /schemas/spi/spi-peripheral-props.yaml# properties: break-control: false flow-control: false @@ -108,7 +108,7 @@ allOf: spi-max-frequency: false reg: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml index ef1155038a2f..1dcbddbc5a74 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml @@ -30,8 +30,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - uicc-present: type: boolean description: | @@ -55,10 +53,11 @@ then: properties: spi-max-frequency: false else: + $ref: /schemas/spi/spi-peripheral-props.yaml# required: - spi-max-frequency -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml index 963d9531a856..647569051ed8 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml @@ -25,8 +25,6 @@ properties: st95hfvin-supply: description: ST95HF transceiver's Vin regulator supply - spi-max-frequency: true - required: - compatible - enable-gpio @@ -34,7 +32,10 @@ required: - reg - spi-max-frequency -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml index 404c8df99364..9cc236ec42f2 100644 --- a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml +++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml @@ -40,8 +40,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - ti,enable-gpios: minItems: 1 maxItems: 2 @@ -65,7 +63,10 @@ required: - ti,enable-gpios - vin-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | -- 2.34.1
