Hi, On 10/03/2014 06:19 PM, Rob Herring wrote: > On Fri, Oct 3, 2014 at 11:04 AM, Geert Uytterhoeven > <geert@xxxxxxxxxxxxxx> wrote: >> Hi Rob, >> >> On Fri, Oct 3, 2014 at 5:57 PM, Rob Herring <robherring2@xxxxxxxxx> wrote: >>> On Fri, Oct 3, 2014 at 9:05 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote: >>>> A simple-framebuffer node represents a framebuffer setup by the firmware / >>>> bootloader. Such a framebuffer may have a number of clocks in use, add a >>>> property to communicate this to the OS. >>>> >>>> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> >>>> Reviewed-by: Mike Turquette <mturquette@xxxxxxxxxx> >>>> >>>> -- >>>> Changes in v2: >>>> -Added Reviewed-by: Mike Turquette <mturquette@xxxxxxxxxx> >>>> Changes in v3: >>>> -Updated description to make clear simplefb deals with more then just memory >>> >>> NAK. "Fixing" the description is not what I meant and does not address >>> my concerns. Currently, simplefb is configuration data. It is >>> auxiliary data about how a chunk of memory is used. Using it or not >>> has no side effects on the hardware setup, but you are changing that >>> aspect. You are mixing in a hardware description that is simply >>> inaccurate. >>> >>> The kernel has made the decision to turn off "unused" clocks. If its >>> determination of what is unused is wrong, then it is not a problem to >>> fix in DT. >> >> The kernel has made that decision because the driver hadn't told the >> kernel that those clocks had to be enabled. >> The only way for the driver to know which clocks to enable is by adding >> them to the description in DT. > > Lack of a proper and complete driver is still a kernel problem. Now, > if you want to accurately describe the display h/w in DT and you > happen to use the simplefb driver, I don't really care. It just needs > to be a separate binding. Please read the: "[PATCH 4/4] simplefb: add clock handling code" thread. The whole purpose we want to use simplefb for is to have a hardware agnostic driver for early boot messages. Not all devices have a usable serial console, so this is a must have for user-friendly debugging of boot problems. Basically the devicetree equivalent of vgacon / efifb. So we actually do not want to describe the hardware accurately, we want something generic, which simplefb gives us, we just want it to be a slightly more complete description then simplefb currently gives as, as the current description is too limited in practice, specifically the simpefb virtual device needs to accurately declare which clocks it uses, just like any other real hardware device in devicetree declares which clocks it uses. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
