For boards that use power-domains' power-supplies that need interrupts to work (like regulator over i2c), set GENPD_FLAG_IRQ_ON. This will tell genpd to adjust accordingly. Currently it "only" sets the correct suspend/resume callbacks. This fixes suspend/resume on imx8mq-librem5 boards (tested) and imx8mq-evk (by looking at dts) and possibly more. Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> --- drivers/soc/imx/gpcv2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index 6383a4edc360..199a621d8186 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -1337,6 +1337,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev) regmap_update_bits(domain->regmap, domain->regs->map, domain->bits.map, domain->bits.map); + if (of_property_read_bool(domain->dev->of_node, "power-supply")) + domain->genpd.flags |= GENPD_FLAG_IRQ_ON; + ret = pm_genpd_init(&domain->genpd, NULL, true); if (ret) { dev_err(domain->dev, "Failed to init power domain\n"); -- 2.30.2