If for example the power-domains' power-supply node (regulator) needs interrupts to work, the current setup with noirq callbacks cannot work; for example a pmic regulator on i2c, when suspending, usually already times out during suspend_noirq: [ 41.024193] buck4: failed to disable: -ETIMEDOUT So fix system suspend and resume for these power-domains by using the "outer" suspend/resume callbacks instead. Tested on the imx8mq-librem5 board, but by looking at the dts, this will fix imx8mq-evk and possibly many other boards too. This is designed so that genpd providers just say "this genpd needs interrupts" (by setting the flag) - without implying an implementation. Initially system suspend problems had been discussed at https://lore.kernel.org/linux-arm-kernel/20211002005954.1367653-8-l.stach@xxxxxxxxxxxxxx/ which led to discussing the pmic that contains the regulators which serve as power-domain power-supplies: https://lore.kernel.org/linux-pm/573166b75e524517782471c2b7f96e03fd93d175.camel@xxxxxxx/T/ Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> --- drivers/base/power/domain.c | 13 +++++++++++-- include/linux/pm_domain.h | 5 +++++ 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 5a2e0232862e..58376752a4de 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -130,6 +130,7 @@ static const struct genpd_lock_ops genpd_spin_ops = { #define genpd_is_active_wakeup(genpd) (genpd->flags & GENPD_FLAG_ACTIVE_WAKEUP) #define genpd_is_cpu_domain(genpd) (genpd->flags & GENPD_FLAG_CPU_DOMAIN) #define genpd_is_rpm_always_on(genpd) (genpd->flags & GENPD_FLAG_RPM_ALWAYS_ON) +#define genpd_irq_on(genpd) (genpd->flags & GENPD_FLAG_IRQ_ON) static inline bool irq_safe_dev_in_sleep_domain(struct device *dev, const struct generic_pm_domain *genpd) @@ -2065,8 +2066,15 @@ int pm_genpd_init(struct generic_pm_domain *genpd, genpd->domain.ops.runtime_suspend = genpd_runtime_suspend; genpd->domain.ops.runtime_resume = genpd_runtime_resume; genpd->domain.ops.prepare = genpd_prepare; - genpd->domain.ops.suspend_noirq = genpd_suspend_noirq; - genpd->domain.ops.resume_noirq = genpd_resume_noirq; + + if (genpd_irq_on(genpd)) { + genpd->domain.ops.suspend = genpd_suspend_noirq; + genpd->domain.ops.resume = genpd_resume_noirq; + } else { + genpd->domain.ops.suspend_noirq = genpd_suspend_noirq; + genpd->domain.ops.resume_noirq = genpd_resume_noirq; + } + genpd->domain.ops.freeze_noirq = genpd_freeze_noirq; genpd->domain.ops.thaw_noirq = genpd_thaw_noirq; genpd->domain.ops.poweroff_noirq = genpd_poweroff_noirq; @@ -2769,6 +2777,7 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev, goto err; dev_gpd_data(dev)->default_pstate = pstate; } + return 1; err: diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index ebc351698090..9cdedbc21158 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -60,6 +60,10 @@ * GENPD_FLAG_MIN_RESIDENCY: Enable the genpd governor to consider its * components' next wakeup when determining the * optimal idle state. + * + * GENPD_FLAG_IRQ_ON: genpd needs irqs to be able to manage power + * on/off. Use the outer suspend/resume callbacks + * instead of noirq for example. */ #define GENPD_FLAG_PM_CLK (1U << 0) #define GENPD_FLAG_IRQ_SAFE (1U << 1) @@ -68,6 +72,7 @@ #define GENPD_FLAG_CPU_DOMAIN (1U << 4) #define GENPD_FLAG_RPM_ALWAYS_ON (1U << 5) #define GENPD_FLAG_MIN_RESIDENCY (1U << 6) +#define GENPD_FLAG_IRQ_ON (1U << 7) enum gpd_status { GENPD_STATE_ON = 0, /* PM domain is on */ -- 2.30.2
