Re: [PATCH v1 3/5] dtb: Add 10GbE node to APM X-Gene SoC device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Sep 24, 2014 at 2:37 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> Hi,
>
> For some reason, the below appears to use a mixture of spaces and tabs
> for alignment. Assuming my local mailserver isn't responsible for that,
> could you please correct that and for consistency use tabs?

I will correct the dtb.  Somehow checkpatch.pl did not catch this.

>
> Could you also please Cc the arm64 maintainers when submitting arm64
> patches?

Sure.  Thanks for pointing it out.

>
> On Wed, Sep 24, 2014 at 04:51:26AM +0100, Iyappan Subramanian wrote:
>> Added 10GbE interface and clock nodes.
>>
>> Signed-off-by: Iyappan Subramanian <isubramanian@xxxxxxx>
>> ---
>>  arch/arm64/boot/dts/apm-mustang.dts |  4 ++++
>>  arch/arm64/boot/dts/apm-storm.dtsi  | 24 ++++++++++++++++++++++++
>>  2 files changed, 28 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
>> index b2f5622..2ae782b 100644
>> --- a/arch/arm64/boot/dts/apm-mustang.dts
>> +++ b/arch/arm64/boot/dts/apm-mustang.dts
>> @@ -32,3 +32,7 @@
>>  &menet {
>>       status = "ok";
>>  };
>> +
>> +&xgenet {
>> +     status = "ok";
>> +};
>> diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
>> index c0aceef..ae814ef 100644
>> --- a/arch/arm64/boot/dts/apm-storm.dtsi
>> +++ b/arch/arm64/boot/dts/apm-storm.dtsi
>> @@ -176,6 +176,16 @@
>>                               clock-output-names = "menetclk";
>>                       };
>>
>> +                        xge0clk: xge0clk@1f61c000 {
>> +                             compatible = "apm,xgene-device-clock";
>> +                             #clock-cells = <1>;
>> +                             clocks = <&socplldiv2 0>;
>> +                             reg = <0x0 0x1f61c000 0x0 0x1000>;
>> +                             reg-names = "csr-reg";
>> +                             csr-mask = <0x3>;
>> +                             clock-output-names = "xge0clk";
>> +                        };
>> +
>>                       sataphy1clk: sataphy1clk@1f21c000 {
>>                               compatible = "apm,xgene-device-clock";
>>                               #clock-cells = <1>;
>> @@ -421,5 +431,19 @@
>>
>>                       };
>>               };
>> +
>> +                xgenet: ethernet@1f610000 {
>> +                     compatible = "apm,xgene-enet";
>> +                        status = "disabled";
>> +                        reg = <0x0 0x1f610000 0x0 0xd100>,
>> +                              <0x0 0x1f600000 0x0 0X400>,
>> +                              <0x0 0x18000000 0x0 0X200>;
>> +                     reg-names = "enet_csr", "ring_csr", "ring_cmd";
>> +                        interrupts = <0x0 0x60 0x4>;
>> +                     dma-coherent;
>> +                        clocks = <&xge0clk 0>;
>
>> +                        local-mac-address = [00 01 73 00 00 04];
>
> Does it really make sense to hard-code the same mac address for all
> mustang boards?
>
> Mark.
>
>> +                     phy-connection-type = "xgmii";
>> +                };
>>       };
>>  };
>> --
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux