[PATCH 0/4] usb: misc: adopt onboard hub support on stm32mp1 boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for USB2514B HUB found on stm32mp1 boards:
- Extend the ehci-generic dt-binding to fully use the usb-hcd.yaml, and so
  the usb-device.yaml.
- Add usb-device compatible ("usbVID,PID") for the USB2514B USB2.0 HUB to
  the onboard_usb_hub driver.
- Add relevant device tree node to stm32mp15 DK boards.
- Enable the onboard_usb_hub driver on multi_v7 platforms.

Fabrice Gasnier (4):
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  ARM: dts: stm32: add support for USB2514B onboard hub on
    stm32mp15xx-dkx
  ARM: multi_v7_defconfig: enable USB onboard HUB driver

 Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 +------
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi                  | 8 ++++++++
 arch/arm/configs/multi_v7_defconfig                     | 1 +
 drivers/usb/misc/onboard_usb_hub.c                      | 2 ++
 drivers/usb/misc/onboard_usb_hub.h                      | 1 +
 5 files changed, 13 insertions(+), 6 deletions(-)

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux