The SDM845 comes with few instances of Bandwidth Monitor. The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).
SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.
Add support for this "LLCC" BWMON. Differences against existing v4 one:
1. No global interrupts.
2. Different register layout.
3. Different shift of interrupt fields.
4. Smaller sampling window.
Cc: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
drivers/soc/qcom/icc-bwmon.c | 114 ++++++++++++++++++++++++++++++++++-
1 file changed, 112 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c
index 63c0aea14c34..d320655e3586 100644
--- a/drivers/soc/qcom/icc-bwmon.c
+++ b/drivers/soc/qcom/icc-bwmon.c
@@ -48,20 +48,31 @@
#define BWMON_V4_IRQ_ENABLE 0x10c
#define BWMON_IRQ_ENABLE_MASK (BIT(1) | BIT(3))
+#define BWMON_V5_IRQ_STATUS 0x000
+#define BWMON_V5_IRQ_CLEAR 0x008
+#define BWMON_V5_IRQ_ENABLE 0x00c
#define BWMON_V4_ENABLE 0x2a0
+#define BWMON_V5_ENABLE 0x010
#define BWMON_ENABLE_ENABLE BIT(0)
#define BWMON_V4_CLEAR 0x2a4
+#define BWMON_V5_CLEAR 0x014
#define BWMON_CLEAR_CLEAR BIT(0)
#define BWMON_CLEAR_CLEAR_ALL BIT(1)
#define BWMON_V4_SAMPLE_WINDOW 0x2a8
+#define BWMON_V5_SAMPLE_WINDOW 0x020
+
#define BWMON_V4_THRESHOLD_HIGH 0x2ac
#define BWMON_V4_THRESHOLD_MED 0x2b0
#define BWMON_V4_THRESHOLD_LOW 0x2b4
+#define BWMON_V5_THRESHOLD_HIGH 0x024
+#define BWMON_V5_THRESHOLD_MED 0x028
+#define BWMON_V5_THRESHOLD_LOW 0x02c
#define BWMON_V4_ZONE_ACTIONS 0x2b8
+#define BWMON_V5_ZONE_ACTIONS 0x030
/*
* Actions to perform on some zone 'z' when current zone hits the threshold:
* Increment counter of zone 'z'
@@ -96,10 +107,12 @@
* 0xff are maximum values meant to ignore the zones 0 and 2.
*/
#define BWMON_V4_THRESHOLD_COUNT 0x2bc
+#define BWMON_V5_THRESHOLD_COUNT 0x034
#define BWMON_THRESHOLD_COUNT_ZONE0_DEFAULT 0xff
#define BWMON_THRESHOLD_COUNT_ZONE2_DEFAULT 0xff
#define BWMON_V4_ZONE_MAX(zone) (0x2e0 + 4 * (zone))
+#define BWMON_V5_ZONE_MAX(zone) (0x044 + 4 * (zone))
/* Quirks for specific BWMON types */
#define BWMON_HAS_GLOBAL_IRQ BIT(0)
@@ -242,6 +255,84 @@ static const struct regmap_config msm8998_bwmon_regmap_cfg = {
.cache_type = REGCACHE_RBTREE,
};
+/* BWMON v5 */
+static const struct reg_field sdm845_llcc_bwmon_reg_fields[] = {
+ [F_GLOBAL_IRQ_STATUS] = {},
+ [F_GLOBAL_IRQ_CLEAR] = {},
+ [F_GLOBAL_IRQ_ENABLE] = {},
+ [F_IRQ_STATUS] = REG_FIELD(BWMON_V5_IRQ_STATUS, 0, 3),
+ [F_IRQ_CLEAR] = REG_FIELD(BWMON_V5_IRQ_CLEAR, 0, 3),
+ [F_IRQ_ENABLE] = REG_FIELD(BWMON_V5_IRQ_ENABLE, 0, 3),
+ /* F_ENABLE covers entire register to disable other features */
+ [F_ENABLE] = REG_FIELD(BWMON_V5_ENABLE, 0, 31),
+ [F_CLEAR] = REG_FIELD(BWMON_V5_CLEAR, 0, 1),
+ [F_SAMPLE_WINDOW] = REG_FIELD(BWMON_V5_SAMPLE_WINDOW, 0, 19),
+ [F_THRESHOLD_HIGH] = REG_FIELD(BWMON_V5_THRESHOLD_HIGH, 0, 11),
+ [F_THRESHOLD_MED] = REG_FIELD(BWMON_V5_THRESHOLD_MED, 0, 11),
+ [F_THRESHOLD_LOW] = REG_FIELD(BWMON_V5_THRESHOLD_LOW, 0, 11),
+ [F_ZONE_ACTIONS_ZONE0] = REG_FIELD(BWMON_V5_ZONE_ACTIONS, 0, 7),
+ [F_ZONE_ACTIONS_ZONE1] = REG_FIELD(BWMON_V5_ZONE_ACTIONS, 8, 15),
+ [F_ZONE_ACTIONS_ZONE2] = REG_FIELD(BWMON_V5_ZONE_ACTIONS, 16, 23),
+ [F_ZONE_ACTIONS_ZONE3] = REG_FIELD(BWMON_V5_ZONE_ACTIONS, 24, 31),
+ [F_THRESHOLD_COUNT_ZONE0] = REG_FIELD(BWMON_V5_THRESHOLD_COUNT, 0, 7),
+ [F_THRESHOLD_COUNT_ZONE1] = REG_FIELD(BWMON_V5_THRESHOLD_COUNT, 8, 15),
+ [F_THRESHOLD_COUNT_ZONE2] = REG_FIELD(BWMON_V5_THRESHOLD_COUNT, 16, 23),
+ [F_THRESHOLD_COUNT_ZONE3] = REG_FIELD(BWMON_V5_THRESHOLD_COUNT, 24, 31),
+ [F_ZONE0_MAX] = REG_FIELD(BWMON_V5_ZONE_MAX(0), 0, 11),
+ [F_ZONE1_MAX] = REG_FIELD(BWMON_V5_ZONE_MAX(1), 0, 11),
+ [F_ZONE2_MAX] = REG_FIELD(BWMON_V5_ZONE_MAX(2), 0, 11),
+ [F_ZONE3_MAX] = REG_FIELD(BWMON_V5_ZONE_MAX(3), 0, 11),
+};
+
+static const struct regmap_range sdm845_llcc_bwmon_reg_noread_ranges[] = {
+ regmap_reg_range(BWMON_V5_IRQ_CLEAR, BWMON_V5_IRQ_CLEAR),
+ regmap_reg_range(BWMON_V5_CLEAR, BWMON_V5_CLEAR),
+};
+
+static const struct regmap_access_table sdm845_llcc_bwmon_reg_read_table = {
+ .no_ranges = sdm845_llcc_bwmon_reg_noread_ranges,
+ .n_no_ranges = ARRAY_SIZE(sdm845_llcc_bwmon_reg_noread_ranges),
+};
+
+static const struct regmap_range sdm845_llcc_bwmon_reg_volatile_ranges[] = {
+ regmap_reg_range(BWMON_V5_IRQ_STATUS, BWMON_V5_IRQ_STATUS),
+ regmap_reg_range(BWMON_V5_ZONE_MAX(0), BWMON_V5_ZONE_MAX(3)),
+};
+
+static const struct regmap_access_table sdm845_llcc_bwmon_reg_volatile_table = {
+ .yes_ranges = sdm845_llcc_bwmon_reg_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(sdm845_llcc_bwmon_reg_volatile_ranges),
+};
+
+/*
+ * Fill the cache for non-readable registers only as rest does not really
+ * matter and can be read from the device.
+ */
+static const struct reg_default sdm845_llcc_bwmon_reg_defaults[] = {
+ { BWMON_V5_IRQ_CLEAR, 0x0 },
+ { BWMON_V5_CLEAR, 0x0 },
+};
+
+static const struct regmap_config sdm845_llcc_bwmon_regmap_cfg = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ /*
+ * No concurrent access expected - driver has one interrupt handler,
+ * regmap is not shared, no driver or user-space API.
+ */
+ .disable_locking = true,
+ .rd_table = &sdm845_llcc_bwmon_reg_read_table,
+ .volatile_table = &sdm845_llcc_bwmon_reg_volatile_table,
+ .reg_defaults = sdm845_llcc_bwmon_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(sdm845_llcc_bwmon_reg_defaults),
+ /*
+ * Cache is necessary for using regmap fields with non-readable
+ * registers.
+ */
+ .cache_type = REGCACHE_RBTREE,
+};
+
static void bwmon_clear_counters(struct icc_bwmon *bwmon, bool clear_all)
{
unsigned int val = BWMON_CLEAR_CLEAR;
@@ -333,7 +424,7 @@ static void bwmon_start(struct icc_bwmon *bwmon)
bwmon_clear_counters(bwmon, true);
window = mult_frac(bwmon->data->sample_ms, HW_TIMER_HZ, MSEC_PER_SEC);
- /* Maximum sampling window: 0xfffff */
+ /* Maximum sampling window: 0xffffff for v4 and 0xfffff for v5 */
regmap_field_write(bwmon->regs[F_SAMPLE_WINDOW], window);
bwmon_set_threshold(bwmon, bwmon->regs[F_THRESHOLD_HIGH],
@@ -478,6 +569,7 @@ static int bwmon_init_regmap(struct platform_device *pdev,
"failed to initialize regmap\n");
BUILD_BUG_ON(ARRAY_SIZE(msm8998_bwmon_reg_fields) != F_NUM_FIELDS);
+ BUILD_BUG_ON(ARRAY_SIZE(sdm845_llcc_bwmon_reg_fields) != F_NUM_FIELDS);
ret = devm_regmap_field_bulk_alloc(dev, map, bwmon->regs,
bwmon->data->regmap_fields,
F_NUM_FIELDS);
@@ -559,8 +651,26 @@ static const struct icc_bwmon_data msm8998_bwmon_data = {
.regmap_cfg = &msm8998_bwmon_regmap_cfg,
};
+static const struct icc_bwmon_data sdm845_llcc_bwmon_data = {
+ .sample_ms = 4,
+ .count_unit_kb = 1024,
+ .default_highbw_kbps = 800 * 1024, /* 800 MBps */
+ .default_medbw_kbps = 256 * 1024, /* 256 MBps */
+ .default_lowbw_kbps = 0,
+ .zone1_thres_count = 16,
+ .zone3_thres_count = 1,
+ .regmap_fields = sdm845_llcc_bwmon_reg_fields,
+ .regmap_cfg = &sdm845_llcc_bwmon_regmap_cfg,
+};
+
static const struct of_device_id bwmon_of_match[] = {
- { .compatible = "qcom,msm8998-bwmon", .data = &msm8998_bwmon_data },
+ {
+ .compatible = "qcom,msm8998-bwmon",
+ .data = &msm8998_bwmon_data
+ }, {
+ .compatible = "qcom,sdm845-llcc-bwmon",
+ .data = &sdm845_llcc_bwmon_data
+ },
{}
};
MODULE_DEVICE_TABLE(of, bwmon_of_match);
--
2.34.1
