Hi Krzysztof, On Thu, Jul 14, 2022 at 01:56:13PM +0200, Krzysztof Kozlowski wrote: > On 14/07/2022 13:29, Laurent Pinchart wrote: > > On Thu, Jul 14, 2022 at 01:23:41PM +0200, Krzysztof Kozlowski wrote: > >> On 14/07/2022 13:12, Laurent Pinchart wrote: > >>>>>>> One option would be to support the following three compatible values: > >>>>>>> > >>>>>>> compatible = "melexis,mlx75026", "melexis,mlx7502x"; > >>>>>>> compatible = "melexis,mlx75027", "melexis,mlx7502x"; > >>>>>>> compatible = "melexis,mlx7502x"; > >>>>>>> > >>>>>>> The last one only would trigger autodetection. I'm still not sure how to > >>>>>>> document that properly in bindings though. > >>>>>> > >>>>>> I missed that part of binding. > >>>>>> > >>>>>> Wildcards are not allowed in compatible, so mlx7502x has to go. > >>>>> > >>>>> Really ? We've had fallback generic compatible strings since the > >>>>> beginning. > >>>> > >>>> Fallback generic compatibles are allowed. Wildcards not. Wildcards were > >>>> actually never explicitly allowed, they just slipped in to many > >>>> bindings... We have several discussions on this on mailing list, so no > >>>> real point to repeat the arguments. > >>>> > >>>> There is a difference between generic fallback. If the device follows > >>>> clear specification and version, e.g. "foo-bar-v4", you can use it for > >>>> generic compatible. This is more common in SoC components. Requirement - > >>>> there is a clear mapping between versions and SoCs. > >>> > >>> I'm not sure to see a clear difference between the two concepts. > >> > >> The clear difference is that you have a versioned and re-usable hardware > >> block plus clear mapping which version goes to which SoC. Version > >> numbers usually start with 1, not with 75025. 75025 is a model name. > > > > How about Documentation/devicetree/bindings/serial/renesas,scif.yaml for > > instance, where the version number isn't known and the SoC name is used > > instead ? Is that acceptable ? > > This is the second case I mentioned - family of devices where the family > fallback is not allowed to be alone. You cannot use just "renesas,scif" > in DTS. > > > > > How should we deal with devices that have different models, where the > > model is irrelevant to the kernel driver, but relevant to userspace ? > > Imagine, for instance, a light sensor with 10 models than only differ by > > the filter they use to tune the sensitivity to different light spectrums > > ? They are all "compatible" from a software point of view, would the > > driver need to list all 10 compatible strings ? > > I don't understand that example, I mean, what's the problem here? If > they are all compatible, you can use only one comaptible, e.g. > melexis,mlx75026. > > If you ever need to differentiate it for user-space, you add specific > compatible for the model and you have: > > melexis,mlx75027, melexis,mlx75026 > > If user-space needs dedicated compatibles - add them, no one here argues > to not to use specific compatibles. Thanks for explanation. Now I understand the device tree better and the whole idea behind it. I'll remove wildcard and autodetect. Instead I will use of_match_table only. > > > >>> For cameras, we often deal with complex pipelines with multiple external > >>> devices and multiple IP cores, with drivers that need to communicate > >>> with each other to initialize the complete camera system. For instance, > >>> each camera-related component in the system registers itself in a media > >>> graph that can be queried from userspace and exposes information about > >>> all devices, including their model. There's no power up of any device > >>> when this query is being performed from userspace. It could possibly be > >>> changed (and maybe it should, for reasons unrelated to this discussion), > >>> but we're looking at pretty much a complete redesign of V4L2 and MC > >>> then. > >> > >> Is then autodetection a real use case since you have to power up the > >> sensor each time system boots and this violates privacy? Several I2C > >> sensors do not care about this and they always do it on power up, so > >> aren't we solving here something unimportant? > > > > In a laptop or tablet with a camera sensor, you likely don't want > > autodetection. In an industrial device, you don't care, and having the > > ability to auto-detect the exact sensor model when booting saves cost in > > the production chain as a single image can work across different models. > > We talk about the case here, not generic. Do you want to have > autodetection possible here or not? > > Best regards, > Krzysztof -- -- Volodymyr Kharuk Embedded Software Engineer Melexis-Ukraine Mykhaila Kotel'nykova St, 4, Kyiv Mobile phone: +38 050 346 5527 www.melexis.com --- The contents of this e-mail are CONFIDENTIAL AND PROPRIETARY. Please read our disclaimer at http://www.melexis.com/mailpolicy
