Re: [PATCH v1 11/14] arm64: dts: ti: Add TI TPS65219 PMIC support for AM642 SK board.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11:17-20220719, Jerome Neanne wrote:
> Add support fot the TI Power Management IC TPS65219
> on the AM642 SKEVM board
> 
> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>
> ---

>  arch/arm64/boot/dts/ti/k3-am642-sk.dts | 104 +++++++++++++++++++++++++
>  1 file changed, 104 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index 59f506cbd275..4daf55b9d61a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -150,6 +150,20 @@
>  		vin-supply = <&com8_ls_en>;
>  		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
>  	};
> +
> +	vsel_sd_nddr: gpio-regulator {
> +		compatible = "regulator-gpio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vsel_sd_nddr_pins_default>;
> +		regulator-name = "tps65219-LDO1-SEL-SD";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		vin-supply = <&ldo1_reg>;
> +		gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
> +		states = <1800000 0x0>,
> +			 <3300000 0x1>;
> +	};
>  };
>  
>  &main_pmx0 {
> @@ -172,6 +186,13 @@
>  		>;
>  	};
>  
> +	main_i2c0_pins_default: main-i2c0-pins-default {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
> +			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
> +		>;
> +	};
> +
>  	main_i2c1_pins_default: main-i2c1-pins-default {
>  		pinctrl-single,pins = <
>  			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
> @@ -258,6 +279,12 @@
>  			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
>  		>;
>  	};
> +
> +	vsel_sd_nddr_pins_default: vsel-sd-nddr-pins-default {
> +		pinctrl-single,pins = <
> +			AM64X_IOPAD(0x00b8, PIN_INPUT, 7) /* (Y7) PRG1_PRU0_GPO0.GPIO0_45 */
> +		>;
> +	};
>  };
>  
>  &mcu_uart0 {
> @@ -301,6 +328,83 @@
>  	status = "disabled";
>  };
>  
> +&main_i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_i2c0_pins_default>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	tps65219: pmic@30 {

Am I missing something?
https://www.ti.com/tool/SK-AM64#design-files
https://www.ti.com/lit/df/sprr432/sprr432.pdf
Page 11: 
I see TPS6521815 at address 0x24, nothing in 0x30?

> +		compatible = "ti,tps65219";
> +		reg = <0x30>;
> +		system-power-controller;
> +
> +		buck1-supply = <&vcc_3v3_sys>;
> +		buck2-supply = <&vcc_3v3_sys>;
> +		buck3-supply = <&vcc_3v3_sys>;
> +		ldo1-supply = <&vcc_3v3_sys>;
> +		ldo2-supply = <&buck2_reg>;
> +		ldo3-supply = <&vcc_3v3_sys>;
> +		ldo4-supply = <&vcc_3v3_sys>;
> +
> +		regulators {
> +			buck1_reg: buck1 {
> +				regulator-name = "VDD_CORE";
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck2_reg: buck2 {
> +				regulator-name = "VCC1V8";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck3_reg: buck3 {
> +				regulator-name = "VDD_LPDDR4";
> +				regulator-min-microvolt = <1100000>;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1_reg: ldo1 {
> +				regulator-name = "VDDSHV_SD_IO_PMIC";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-allow-bypass;
> +			};
> +
> +			ldo2_reg: ldo2 {
> +				regulator-name = "VDDAR_CORE";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo3_reg: ldo3 {
> +				regulator-name = "VDDA_1V8";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo4_reg: ldo4 {
> +				regulator-name = "VDD_PHY_2V5";
> +				regulator-min-microvolt = <2500000>;
> +				regulator-max-microvolt = <2500000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
>  &main_i2c1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_i2c1_pins_default>;
> -- 
> 2.17.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux