The PHY interrupt (INT_N) pin is connected to IRQ2 and IRQ3 for ETH0
and ETH1 respectively.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 9410796c8ad6..f15d093fc6de 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -94,6 +94,8 @@ phy0: ethernet-phy@7 {
compatible = "ethernet-phy-id0022.1640",
"ethernet-phy-ieee802.3-c22";
reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rxc-skew-psec = <2400>;
txc-skew-psec = <2400>;
rxdv-skew-psec = <0>;
@@ -120,6 +122,8 @@ phy1: ethernet-phy@7 {
compatible = "ethernet-phy-id0022.1640",
"ethernet-phy-ieee802.3-c22";
reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
rxc-skew-psec = <2400>;
txc-skew-psec = <2400>;
rxdv-skew-psec = <0>;
@@ -171,7 +175,8 @@ eth0_pins: eth0 {
<RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
<RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
<RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
};
eth1_pins: eth1 {
@@ -189,7 +194,8 @@ eth1_pins: eth1 {
<RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
<RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
<RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
};
gpio-sd0-pwr-en-hog {
--
2.25.1
