From: Rafał Miłecki <rafal@xxxxxxxxxx>
There are 5 software-controllable LEDs on PCB.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
V2: Include header & adjust nodes names
---
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 169fbb7cfd34..5862db5cab2f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "bcm4908.dtsi"
@@ -118,6 +119,53 @@ ethernet-phy@3 {
};
};
+&leds {
+ led-power@11 {
+ reg = <0x11>;
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "on";
+ active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_led_17_a>;
+ };
+
+ led-wan-red@12 {
+ reg = <0x12>;
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_RED>;
+ active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_led_18_a>;
+ };
+
+ led-wps@14 {
+ reg = <0x14>;
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
+ active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_led_20_a>;
+ };
+
+ led-wan-white@15 {
+ reg = <0x15>;
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_WHITE>;
+ active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_led_21_a>;
+ };
+
+ led-lan@19 {
+ reg = <0x19>;
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_WHITE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_led_25_a>;
+ };
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
--
2.34.1
