[PATCH v3 1/2] dt-bindings: power: reset: qcom-pon: update "reg" property details

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Collins <quic_collinsd@xxxxxxxxxxx>

Update the description of "reg" property to add the PON_PBS base
address along with PON_HLOS base address.  Also add "reg-names"
property description.

Signed-off-by: David Collins <quic_collinsd@xxxxxxxxxxx>
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 73 ++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index 353f155d..562fe308 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -15,18 +15,26 @@ description: |
 
   This DT node has pwrkey and resin as sub nodes.
 
-allOf:
-  - $ref: reboot-mode.yaml#
-
 properties:
   compatible:
     enum:
       - qcom,pm8916-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
+      - qcom,pmk8350-pon
 
   reg:
-    maxItems: 1
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+
+  reg-names:
+    description: |
+      For PON GEN1 and GEN2, it should be "pon". For PON GEN3 it should include
+      "hlos" and optionally "pbs".
 
   pwrkey:
     type: object
@@ -42,6 +50,63 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: reboot-mode.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8916-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pms405-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8998-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
 examples:
   - |
    #include <dt-bindings/interrupt-controller/irq.h>
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux