[PATCH 1/2] arm64: dts: imx8qm-mek: mux and hook up GPIOs related to SD1

[Tamás Szűcs <tszucs@xxxxxxxxxxxxx>]

Add pinctrl node grouping USDHC1_DATA6, USDHC1_DATA7 and USDHC1_RESET_B and use
them as Write Protect and Card Detect for usdhc2 and regulator enable for
SD1_SPWR respectively.

Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support")

Signed-off-by: Tamás Szűcs <tszucs@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index ce9d3f0b98fc..19b60efe3639 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -32,7 +32,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -79,11 +79,11 @@ &usdhc1 {

 &usdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
-	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

@@ -141,4 +141,12 @@ IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
 			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
 		>;
 	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21			0x00000021
+			IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22			0x00000021
+			IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07			0x00000021
+		>;
+	};
 };
--
2.30.2