LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
functions being configured.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@xxxxxxxxxxxxx>
---
v7 -> v8:
- Changed compatible string to microchip,lan9668-flexcom.
v6 -> v7:
- Add #address-cells, #size-cells to flx3 example.
v5 -> v6:
- Removed spi node from flx3 example.
v4 -> v5:
- Fixed indentations and dt-schema errors.
- No errors seen with 'make dt_binding_check'.
v3 -> v4:
- Added else condition to allOf:if:then.
v2 -> v3:
- Add reg property of lan966x missed in v2.
v1 -> v2:
- Use allOf:if:then for lan966x dt properties
.../bindings/mfd/atmel,sama5d2-flexcom.yaml | 65 ++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
index bfa7d340a198..568da7cb630c 100644
--- a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -18,9 +18,11 @@ properties:
compatible:
enum:
- atmel,sama5d2-flexcom
+ - microchip,lan9668-flexcom
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
clocks:
maxItems: 1
@@ -47,6 +49,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3]
+ microchip,flx-shrd-pins:
+ description: Specify the Flexcom shared pins to be used for flexcom
+ chip-selects.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 20
+
+ microchip,flx-cs:
+ description: Flexcom chip selects. Here, value of '0' represents "cts" line
+ of flexcom USART or "cs0" line of flexcom SPI and value of '1' represents
+ "rts" line of flexcom USART or "cs1" line of flexcom SPI.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
patternProperties:
"^serial@[0-9a-f]+$":
type: object
@@ -74,6 +97,31 @@ required:
- ranges
- atmel,flexcom-mode
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,lan9668-flexcom
+
+ then:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ - description: Flexcom shared registers map
+ required:
+ - microchip,flx-shrd-pins
+ - microchip,flx-cs
+
+ else:
+ properties:
+ reg:
+ items:
+ - description: Flexcom base registers map
+ microchip,flx-shrd-pins: false
+ microchip,flx-cs: false
+
additionalProperties: false
examples:
@@ -89,4 +137,19 @@ examples:
ranges = <0x0 0xf8034000 0x800>;
atmel,flexcom-mode = <2>;
};
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ flx3: flexcom@e0064000 {
+ compatible = "microchip,lan9668-flexcom";
+ reg = <0xe0064000 0x100>,
+ <0xe2004180 0x8>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe0040000 0x800>;
+ atmel,flexcom-mode = <2>;
+ microchip,flx-shrd-pins = <9>;
+ microchip,flx-cs = <0>;
+ };
...
--
2.25.1
