Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use
the preferred -gpios suffix. Also, with this change the dtb_check will
not complain when trying to verify the DTS against the sff,sfp.yaml
binding.
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
- new patch
Changes in v3:
- none
.../boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index 41702e7386e3..a7dcbecc1f41 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -34,28 +34,28 @@ key {
sfp0: sfp-0 {
compatible = "sff,sfp";
i2c-bus = <&sfp0_i2c>;
- mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>;
};
sfp1: sfp-1 {
compatible = "sff,sfp";
i2c-bus = <&sfp1_i2c>;
- mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>;
};
sfp2: sfp-2 {
compatible = "sff,sfp";
i2c-bus = <&sfp2_i2c>;
- mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>;
};
sfp3: sfp-3 {
compatible = "sff,sfp";
i2c-bus = <&sfp3_i2c>;
- mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <2000>;
};
};
--
2.34.1
